Rev-A-Shelf 6581 Series Stainless Steel 28"L x 2-1/8"D x 3"H x Soft-close Sink Tip Out Tray, No Tab Stop - 6581-28SC-52
Description
Choose a sink tip out tray
sink tip out tray gives you a clean way to use the false-front space at the sink for small-item storage. This Rev-A-Shelf sink tip out tray is a stainless steel sink tip out tray from the 6581 Series, sized at 28 inches long, 2-1/8 inches deep, and 3 inches high. The set is described as a sink tip out tray set with 1 tray and 2 soft-close sink tip out hinges. It is built for buyers who want a sink front tray with a stainless steel finish and a quieter closing action. For a tip out tray replacement or a new under sink false front tray setup, this product gives you a clearly defined tray size, stainless steel construction, and included hinge count to help you match the opening before ordering.
See practical gains from each tray
- Rev-A-Shelf 6581 Series sink tip out tray - Helps buyers match the product to a known series when replacing an existing sink front tray.
- Stainless steel tray construction - Gives the sink tip out tray a metal build suited to wet sink-area storage use.
- Stainless steel finish - Supports a consistent look for buyers who want a metal tray inside the sink false front area.
- 28 inch tray length - Helps cover wider false-front openings where a shorter tip out tray replacement may not fit.
- 2-1/8 inch tray depth - Gives a defined shallow profile for small sink-area items while helping buyers check clearance.
- 3 inch tray height - Provides a clear dimension to compare against available space behind the sink front.
- Soft-close sink tip out hinges included - Helps create a quieter closing action than a basic hinge-only setup.
- One tray and two hinges - Gives the buyer a matched set for a single sink tip out tray installation.
- No tab stop configuration - Helps buyers choose the correct tray style when matching an existing Rev-A-Shelf tray setup.
Confirm sink tip out tray fit
Key specs to confirm: This Rev-A-Shelf sink tip out tray is listed at 28 inches long, 2-1/8 inches deep, and 3 inches high. It is a stainless steel tray with a stainless steel finish and soft-close hinges. Before purchase, confirm the false-front opening width, the available interior depth behind the panel, and the clearance around the sink bowl, faucet hardware, and any plumbing that may interfere with tray movement. This item is described as a no tab stop version, so buyers replacing an older tray should confirm that detail. Any load, compliance, or other technical requirements not shown here should be confirmed through manufacturer or technical documentation.
What's included: Verified included contents are 1 stainless steel sink tip out tray and 2 soft-close hinges.
What to verify before ordering: Check your sink base false-front dimensions, confirm that a 28 inch tray length fits your cabinet, verify that 2-1/8 inch depth and 3 inch height clear the sink and plumbing, and make sure you want the no tab stop configuration rather than a tray with tab stops.
Compare sink tip out tray options
Use a sink front tray well
A sink tip out tray is commonly used in the false-front panel below a sink to hold small items that otherwise end up loose around the cabinet. For installers, remodelers, and serious DIY buyers, that hidden space can be useful for sponges, scrub pads, or other compact sink-area items, but only if the tray dimensions and hinge style match the cabinet opening. This Rev-A-Shelf sink tip out tray is built around a clear size: 28 inches long, 2-1/8 inches deep, and 3 inches high. That makes it easier to evaluate as a tip out tray replacement when an existing sink front tray is worn out or when a new under sink false front tray is being added during a cabinet update.
The stainless steel construction matters in a sink cabinet because the area is exposed to moisture and daily use. Buyers looking for a stainless steel sink tip out tray often want a metal tray rather than plastic, especially in kitchens where wet cleaning tools are stored near the sink. The stainless steel finish also gives a straightforward match to the product material listed by the manufacturer. Because this set includes 2 soft-close sink tip out hinges, it is also aimed at buyers who want a quieter close than a basic hinge arrangement.
Fit is still the main purchase decision. A kitchen sink tip out tray can fail to install properly if the sink bowl extends too far back, if faucet hardware blocks movement, or if the false-front panel dimensions do not suit the tray length. This product is listed as a no tab stop version, which is an important detail for buyers matching an existing Rev-A-Shelf setup. If your current cabinet uses a different stop style, confirm compatibility before ordering. For replacement work, compare the installed tray length, interior depth, panel attachment points, and hinge location with the dimensions provided here.
Compare stainless steel sink tip out tray choices
When buyers compare sink tip out tray options, the main differences usually come down to material, length, depth, included hardware, and hinge action. This Rev-A-Shelf sink tip out tray gives a verified stainless steel tray, stainless steel finish, and a set that includes one tray with two soft-close hinges. That makes it easier to evaluate than listings that do not clearly state whether hinges are included or whether the tray is a metal or non-metal style.
Another useful comparison point is dimensional clarity. Here, the tray is identified as 28 inches long with a standard 2-1/8 inch depth and a 3 inch height. For professionals ordering parts across multiple sink bases, those numbers help reduce guesswork. For a homeowner replacing an older sink front tray, they provide a direct checklist against the cabinet opening and available clearance behind the false front.
Buyers should also compare stop style before ordering. This product is specifically described as no tab stop. That detail can affect how closely the new tray matches an existing installation. Generic tray listings may leave that point unclear, which can create extra work at install time. A buyer choosing this sink tip out tray set should focus on the verified tray dimensions, stainless steel construction, included soft-close sink tip out hinges, and the no tab stop configuration. Those are the details that support a more consistent ordering decision without relying on assumptions.
Answer sink tip out tray questions
Will this sink tip out tray fit any sink base cabinet?
This sink tip out tray fits only where the false-front opening and interior clearance suit a 28 inch long, 2-1/8 inch deep, and 3 inch high tray.
Are sink tip out hinges included with this set?
This sink tip out tray set includes 2 soft-close sink tip out hinges and 1 tray.
Is this a stainless steel sink front tray?
This Rev-A-Shelf sink front tray is made of stainless steel and has a stainless steel finish.
What does no tab stop mean for this tray?
This sink tip out tray is listed as a no tab stop version, so buyers replacing an older tray should confirm that their existing setup uses the same style.
Can this be used as a tip out tray replacement?
This tip out tray replacement can work when your current sink false front accepts the listed dimensions and you want a tray with 2 included soft-close hinges.
How do I check if the tray clears my sink and plumbing?
This sink tip out tray requires you to measure behind the false front and confirm that the sink bowl, faucet hardware, and plumbing do not block tray movement.
What are the tray dimensions I need to match?
This Rev-A-Shelf sink tip out tray is 28 inches long, 2-1/8 inches deep, and 3 inches high.
Is this tray meant for kitchen sink use?
This kitchen sink tip out tray is sold in the sink tip out trays and accessories category and is intended for sink false-front storage applications.
What should I follow during installation?
This sink tip out tray should be installed by following manufacturer installation guidance and local building requirements where applicable.
Order the right sink tip out tray
sink tip out tray selection is easier when you match the listed dimensions and included hardware to your cabinet before ordering. This Rev-A-Shelf sink tip out tray set includes 1 stainless steel tray and 2 soft-close hinges, with a tray size of 28 inches long, 2-1/8 inches deep, and 3 inches high. Confirm your false-front opening, sink and plumbing clearance, and whether you need the no tab stop version. Those checks help you order the right sink front tray for a clean replacement or new install.
