Rev-A-Shelf 6581 Series Stainless Steel 14-1/4"L x 2-1/8"D x 3"H x Sink Tip Out Tray, No Tab Stop - 6581-14-5

Choose a stainless steel sink tip out tray

stainless steel sink tip out tray gives you a narrow storage area at the front of a sink base cabinet where a false drawer panel tips out for access. This Rev-A-Shelf sink tip out tray is part of the 6581 series sink tip out tray line and is made of stainless steel with a stainless steel finish. The tray measures 14-1/4 inches long, 2-1/8 inches deep, and 3 inches high. This sink tip out tray no tab stop configuration is useful when you need the tray style shown for your cabinet setup. For buyers replacing an under sink tip out tray or planning a new sink base build, these verified dimensions help you check available space before ordering.

See how this sink tip out tray helps

• Rev-A-Shelf stainless steel sink tip out tray - gives you a dedicated storage tray for the sink front area using a recognized cabinet accessory brand.
• 14-1/4 inch length - helps you match the tray to a false front opening that can accept this tray size.
• 2-1/8 inch depth - supports shallow storage where clearance is limited behind the sink front panel.
• 3 inch height - provides a defined tray wall height for holding small sink-area items.
• No tab stop design - helps buyers choose the tray style that matches their preferred hardware setup or replacement need.
• 6581 series sink tip out tray - supports buyers who want a tray from the verified Rev-A-Shelf series listed for this product.
• Stainless steel construction - gives the sink tip out tray a metal build suited to kitchen and bath cabinet accessory use.
• Stainless steel finish - provides a consistent metal appearance for visible tray surfaces when the panel tips open.
• Single tray configuration - helps buyers ordering one tray for a specific sink front opening.

Confirm sink tip out tray fit and contents

Key specs to confirm: This sink tip out tray is a Rev-A-Shelf 6581 Series stainless steel tray with a verified size of 14-1/4 inches long, 2-1/8 inches deep, and 3 inches high. Confirm that your sink base false front opening, interior clearance, and planned hinge setup can accept a tray of this length, depth, and height. This model is listed as a no tab stop tray, so buyers replacing an existing tray should confirm that the stop style matches the original application. If you need hinge details, mounting hardware details, load information, or any compliance-related documentation, those items should be confirmed through the manufacturer or technical documentation before installation.

What's included: Verified product data identifies one sink tip out tray. Hinges are not verified as included with this specific item and should be confirmed before ordering.

What to verify before ordering: Check tray length against the false front width, verify the 2-1/8 inch depth clears plumbing and sink structure, confirm the 3 inch height fits your layout, and make sure you want the no tab stop version rather than a tray with tab stops or a tray-and-hinge package.

Compare sink tip out tray use and fit

Use a sink tip out tray near sinks

A sink tip out tray is commonly used in the false drawer front area of a sink base cabinet, where space is often wasted. For installers, cabinet shops, and serious DIY buyers, this product fits projects where the goal is to add small-item storage close to the sink without changing the main cabinet box. A Rev-A-Shelf sink tip out tray like this one is useful for holding compact sink-area items in a shallow compartment that opens when the front panel tips out.

This specific stainless steel tip out tray is suited to buyers who already know the opening they need to fill or who are replacing a worn tray with matching dimensions. The verified sink tip out tray dimensions are 14-1/4 inches long, 2-1/8 inches deep, and 3 inches high. Those numbers matter because sink base cabinets often have limited room due to sink bowls, faucets, clips, and plumbing. In many cases, the tray depth is the first dimension to confirm, since the area behind a false front can be tight.

The no tab stop detail also matters during selection. Buyers looking for a sink tip out tray replacement should compare their current tray style before ordering. If your existing setup uses a different stop style or includes hardware not listed here, confirm compatibility with the manufacturer documentation. The product data verifies the tray material and finish as stainless steel, but it does not verify hinge inclusion for this exact item, so hardware should be checked separately if your project needs a complete under sink tip out tray installation.

For new cabinet work, this 6581 series sink tip out tray can be part of a clean, practical sink front storage plan. For repair work, it can serve as a targeted replacement when the opening and tray style match. In either case, accurate measuring is the step that prevents rework.

Compare stainless steel tip out tray options

When buyers compare sink tip out tray options, the main differences usually come down to material, dimensions, stop style, and whether hinges are included. This Rev-A-Shelf sink tip out tray gives clear verified information on material and size, which makes it easier to evaluate fit before purchase. Stainless steel construction and a stainless steel finish are useful reference points for buyers who want a metal tray rather than a different material type.

Another practical comparison point is the tray format. This item is a single tray with no tab stop. That makes it important to compare your cabinet setup to the exact configuration shown in the product data. Some buyers only need the tray itself because they already have compatible hardware. Others may need a tray package that includes hinges. Since hinge inclusion is not verified here, that detail should be checked before ordering.

Brand consistency can also matter in repeat cabinet work. Rev-A-Shelf is the verified brand for this tray, and the product is identified within the 6581 series. For trade buyers managing multiple installs, a clearly identified brand, product type, and dimension set helps with repeat ordering and replacement planning. Rather than choosing by appearance alone, compare the exact tray length, depth, height, and stop style to your project requirements. That approach is usually the most reliable way to avoid fit issues in sink front storage applications.

Check sink tip out tray ordering questions

Order the right sink tip out tray

sink tip out tray replacement decisions are easier when you match the tray type, dimensions, and included parts before purchase. This Rev-A-Shelf tray is a stainless steel sink tip out tray with verified dimensions of 14-1/4 inches by 2-1/8 inches by 3 inches and a no tab stop design. The verified package information supports a single tray, so confirm whether you also need hinges or other hardware. Before ordering, check false front size, interior sink-front clearance, and whether this exact tray style matches your cabinet application.