Rev-A-Shelf 6591 Series Stainless Steel 31"L x 2-1/8"D x 3"H x Sink Tip Out Tray, With Tab Stop - 6591-31-6
Description
Choose a sink tip out tray
sink tip out tray adds usable storage to the false drawer front area often found below a kitchen sink. The Rev-A-Shelf sink tip out tray in this listing is a stainless steel sink tip out tray from the 6591 Series, made as a single tray with tab stop and a stainless steel finish. This sink tip out tray for kitchen sink applications measures 31 inches long, 2-1/8 inches deep, and 3 inches high. Buyers looking for a sink tip out tray replacement or a new sink front tray can use these verified dimensions to check fit before ordering. Rev-A-Shelf offers the 6581 and 6591 Series in multiple lengths, and this specific model is the 31 inch stainless tray with tab stop shown in the product data.
See stainless steel tray buying advantages
- Rev-A-Shelf brand sink tip out tray - Helps buyers source a known cabinet accessory line used for sink front storage upgrades and replacements.
- Stainless steel construction - Supports a clean, durable tray surface for the sink front area where moisture exposure is common.
- Stainless steel finish - Gives the tray a consistent metal look that matches the verified material and product description.
- 31 inch length - Helps buyers match the tray to a wider sink front panel after confirming cabinet front size.
- 2-1/8 inch depth - Fits the standard depth noted in the product data and helps with shallow storage applications.
- 3 inch height - Provides a defined tray wall height for holding small sink area items once installed.
- With tab stop - Adds the tab stop configuration specified for this sink tip out accessory, which buyers can match to their preferred setup.
- Single tray package - Clarifies that this listing is for one tray, helping avoid confusion when planning a sink tip out tray replacement.
- 6591 Series sink front tray - Helps buyers align this tray with the correct Rev-A-Shelf series when replacing an existing part or standardizing hardware.
Confirm sink tip out tray fit
Key specs to confirm: This Rev-A-Shelf sink tip out tray is a stainless steel tray that measures 31 inches long, 2-1/8 inches deep, and 3 inches high. It is described as a single tray with tab stop in the 6591 Series. Before purchase, confirm the usable width behind your sink front panel, the available interior clearance, and whether your project calls for a sink tip out tray with tab stop. If hinge style, mounting method, or exact door-front compatibility are critical for your installation, those details should be confirmed with the manufacturer or technical documentation. Safety, load, compliance, and any installation rating details are not provided here and should also be confirmed if needed.
What's included: Verified product data identifies one Rev-A-Shelf 6591 Series stainless steel sink tip out tray with tab stop. Hinges are referenced at the series level as available with and without hinges, so included hinge hardware for this listing should be confirmed before ordering.
What to verify before ordering: Check sink front opening width, inside clearance behind the false front, required tray depth, preferred tray height, and whether your project needs hinges or other mounting hardware in addition to the tray.
Match sink tip out tray use
Use a sink tip out tray daily
A sink tip out tray is typically used in the false drawer front below a kitchen sink, where shallow storage can keep small items close at hand. This makes sense for installers, cabinet shops, and homeowners who want a neat place for compact sink-area items without taking up room in the main base cabinet. A Rev-A-Shelf sink tip out tray is especially relevant when an existing tray is worn, missing, or the sink front has never been equipped with one.
This specific tray is a stainless steel sink tip out tray with a 31 inch length, 2-1/8 inch depth, and 3 inch height. Those dimensions matter because sink front areas are often shallow and can vary by cabinet construction. For a sink tip out tray replacement, the first step is to compare the old tray size to the new one and then verify the clear opening behind the panel. For a new installation, measure the false front carefully and confirm that the tray will not interfere with plumbing, sink bowls, or other hardware behind the panel.
The tab stop configuration is another purchase point. Buyers searching for a sink tip out tray with tab stop usually want to match an existing setup or prefer a tray style identified that way in the project specification. Because hinge details are not fully confirmed in this listing, buyers should verify whether hinge hardware is included or whether it must be ordered separately. That is important for both a sink front tray upgrade and a first-time install.
For trade buyers, the stainless steel material can be a practical fit for sink-area conditions. For serious DIY buyers, the listed dimensions give a clear starting point for deciding whether this tip out tray stainless steel model fits the cabinet front they have. In either case, the product type is straightforward: a single Rev-A-Shelf sink tip out accessory designed for sink front storage where a shallow tray is needed.
Compare stainless steel sink tip out tray options
When buyers compare sink tip out tray options, the most useful points are usually material, tray size, and configuration. This Rev-A-Shelf sink tip out tray gives verified details in all three areas. It is stainless steel, it has a stainless steel finish, and it is sized at 31 inches long by 2-1/8 inches deep by 3 inches high. It is also identified as a one-tray item with tab stop in the 6591 Series.
That makes comparison easier against generic sink front tray choices where the exact dimensions or tray style may not be clear. A buyer who needs a sink tip out tray 31 inch model can quickly focus on length first, then confirm depth and height for cabinet clearance. A buyer replacing a damaged tray can also check whether the old unit used a tab stop style before switching to a different configuration.
Brand consistency can matter in cabinet accessory work because it helps buyers stay aligned with known series naming and replacement paths. Rev-A-Shelf identifies both 6581 and 6591 Series premium sink tip-out trays, with lengths ranging from 10 inches to 31 inches long at the series level. For this product page, the verified item is the 31 inch tray in the 6591 Series. If your project depends on matching hinges, exact mounting hardware, or a specific front panel setup, confirm those details before ordering rather than assuming all sink tip out accessories are packaged the same way.
In practical terms, this product is a fit-focused purchase. If the dimensions and tray style match your cabinet front and installation plan, the listing gives a clear, factual basis for ordering. If your project has unknowns around hinges or cabinet construction, verify those points first to avoid delays and reorders.
Ask fit questions before ordering
Will this sink tip out tray fit any sink base cabinet?
This sink tip out tray fits only where the false front and interior clearance can accept a 31 inch long, 2-1/8 inch deep, 3 inch high tray. Follow manufacturer installation guidance and local building requirements where applicable.
Is this a stainless steel sink tip out tray?
This Rev-A-Shelf sink tip out tray is made of stainless steel and has a stainless steel finish.
Does this sink front tray include hinges?
This product listing verifies one tray, but hinge inclusion is not confirmed here. Rev-A-Shelf notes that sink tip-out hinges are available with and without hinges, so buyers should confirm included hardware.
What does with tab stop mean for this tray?
This sink tip out tray is identified as a with tab stop model in the product name and SAP description. Buyers should match that configuration to their existing setup or installation preference.
Can I use this as a sink tip out tray replacement?
This sink tip out tray replacement can work when your existing tray area matches the listed dimensions and required configuration. Confirm length, depth, height, and hardware needs before ordering.
What are the exact dimensions of this tray?
This Rev-A-Shelf tray measures 31 inches long, 2-1/8 inches deep, and 3 inches high.
Is this tray meant for kitchen sink use?
This sink tip out tray is a kitchen and bath cabinet accessory commonly used in the false front below a sink, subject to fit and clearance checks.
How do I confirm if the tray will clear plumbing?
This sink front tray should be checked against the available space behind the false front, including sink bowls, plumbing, and any existing hardware. Follow manufacturer installation guidance and local building requirements where applicable.
Is more than one tray included?
This listing is identified as a one-tray item, so buyers should plan on one sink tip out accessory unless additional items are separately confirmed.
Order the right sink front tray
Rev-A-Shelf sink tip out tray is a straightforward choice when you need a stainless steel sink front tray with verified dimensions and a tab stop configuration. This listing covers one 6591 Series tray measuring 31 inches long, 2-1/8 inches deep, and 3 inches high. Before purchase, confirm false front width, interior clearance, and whether hinges or other mounting parts are needed for your installation. Matching those details first helps you order the right tray for the cabinet and avoid fit issues on site.
