Choose a stainless steel sink tip out tray

stainless steel sink tip out tray gives you a compact storage area at the front of a sink cabinet where space is often wasted. The Rev-A-Shelf sink tip out tray in the 6591 Series is made of stainless steel and has a stainless steel finish for a clean match in kitchen and bath cabinet applications. This sink tip out tray with tab stop is sized at 19 inches long, 2-1/8 inches deep, and 3 inches high. Buyers looking for a sink tip out tray replacement or a tip out tray for sink cabinet projects can use these verified dimensions to check fit before ordering. The product data identifies this item as a single tray and notes that the premium 6581 and 6591 Series is offered with and without tab stops.

See practical gains from this sink tip out tray

• Stainless steel sink tip out tray construction - Helps provide a durable tray surface for small sink-front storage in kitchen and bath cabinets.
• Stainless steel finish - Gives the Rev-A-Shelf sink tip out tray a consistent metal appearance that suits many cabinet interiors.
• Tab stop design - Helps buyers who want a sink tip out tray with tab stop choose the correct tray style from the series.
• 19 inch length - Supports fit planning when replacing an existing sink tip out tray or laying out a new sink-front panel.
• 2-1/8 inch depth - Provides the standard depth noted in the product data for this sink tip out tray format.
• 3 inch height - Helps confirm front-panel and interior clearance for the tray before installation.
• Single-tray configuration - Simplifies ordering when the project calls for one tray rather than a multi-piece package.
• Rev-A-Shelf 6591 Series sink tip out tray - Gives buyers a clear series reference when matching an existing tray style or planning a sink tip out tray replacement.

Confirm sink tip out tray fit and contents

Key specs to confirm: This Rev-A-Shelf sink tip out tray is listed at 19 inches long, 2-1/8 inches deep, and 3 inches high. The product data also identifies stainless steel construction, a stainless steel finish, and a tab stop design. For a sink tip out tray installation, confirm the usable width of the sink-front panel, the interior clearance behind that panel, and whether your project requires a tray with tab stop. If you are matching an older sink tip out tray replacement, verify that the tray length and front-panel opening align with your cabinet. Hinge details, load details, and any compliance information are not provided here and should be confirmed with the manufacturer or technical documentation.

What's included: One Rev-A-Shelf 6591 Series stainless steel sink tip out tray with tab stop is verified. Hinges are referenced at the series level as available with and without hinges, so included hinge hardware for this specific item should be confirmed before ordering.

What to verify before ordering: Check sink-front panel width, tray length clearance, interior depth, panel height, whether you need tab stops, and whether hinges are included or must be ordered separately. Follow manufacturer installation guidance and local building requirements where applicable.

Compare sink tip out tray use and fit

Use a sink tip out tray in tight spaces

A sink tip out tray is typically chosen when a buyer wants to use the narrow space in front of a kitchen or bath sink. That area often stays empty because standard cabinet storage does not fit well around the sink bowl and plumbing. A stainless sink tip out tray helps turn that unused strip into a practical spot for small items.

This Rev-A-Shelf sink tip out tray is built for that purpose. The verified dimensions of 19 inches long, 2-1/8 inches deep, and 3 inches high give installers and serious DIY buyers a starting point for layout. If you are planning a tip out tray for sink cabinet use, those dimensions matter because the tray must fit the sink-front panel opening and still clear the cabinet interior. For replacement work, the listed sink tip out tray dimensions are especially helpful when you are trying to match an older tray or avoid drilling new holes until fit is confirmed.

The tab stop detail is another practical point. Buyers searching for a sink tip out tray with tab stop are usually trying to match the tray style already used in a cabinet or they want a tray that follows the tab-stop format specified for their hardware setup. Because the product data confirms this tray includes tab stops, it is easier to narrow the selection when comparing multiple sink-front tray options in the same series.

The stainless steel construction also matters in sink areas. A sink-front accessory is often placed in a location where water, soap, and daily cleaning are part of normal use. This product is verified as stainless steel with a stainless steel finish, which makes it a clear fit for buyers who want a metal tray rather than a plastic insert. If your project needs matching hinges, be sure to confirm whether they are included with this exact item or must be purchased separately, since the series description mentions hinge availability but does not verify inclusion for this SKU.

Compare stainless sink tip out tray options

When buyers compare sink tip out tray options, the most important differences are usually material, dimensions, tray style, and what is actually included. This Rev-A-Shelf 6591 Series tray gives you clear verified information in those areas. It is a stainless steel sink tip out tray, it has a stainless steel finish, it is a single tray, and it is sized at 19 inches by 2-1/8 inches by 3 inches.

That level of detail helps reduce ordering mistakes. Some trays are chosen mainly by length, while others are selected because the installer needs a specific depth or a tab-stop format. For this product, the standard 2-1/8 inch depth stated in the product data is useful for buyers comparing trays within a sink-front storage project. The 3 inch height is also worth checking against the space available in the cabinet front.

Brand consistency can also matter when replacing an existing part. Buyers often prefer to stay within the same product family when matching appearance or installation style. Because this tray is clearly identified as a Rev-A-Shelf sink tip out tray in the 6591 Series, it gives a straightforward reference point for those replacement decisions. At the same time, anyone planning a first-time sink tip out tray installation should still confirm hinge compatibility, panel dimensions, and the exact included components before ordering. Those checks are the practical way to compare trays and avoid choosing a product that fits the opening but does not match the rest of the hardware setup.

Answer sink tip out tray ordering questions

Order the right Rev-A-Shelf sink tip out tray

Rev-A-Shelf sink tip out tray selection is easier when you match the verified dimensions and tray style to your cabinet opening. This item is a single stainless steel tray with tab stop, sized at 19 inches long, 2-1/8 inches deep, and 3 inches high. Before purchase, confirm sink-front panel fit, interior clearance, and whether your project needs hinges included or ordered separately. Those checks help you choose the correct tray for a clean sink-front storage install.