Choose this sink tip out tray

sink tip out tray gives you a clean way to use the false-front space at a sink cabinet for small-item storage. The Rev-A-Shelf sink tip out tray in this listing is a stainless steel sink tip out tray from the 6581 Series. It measures 25 inches long, 2-1/8 inches deep, and 3 inches high. This model is a one-tray format and is listed without tab stop. Buyers looking for a tip out tray replacement, an under sink false front tray, or specific sink tip out tray dimensions can use these verified measurements to compare cabinet fit before ordering. Rev-A-Shelf offers this sink tray as part of its premium 6581 and 6591 Series tip-out tray line, with standard 2-1/8 inch depth and lengths that range from 10 inches to 31 inches across the series.

Use a sink tray for access

• Stainless steel sink tip out tray - Stainless steel construction helps buyers match a durable tray material to sink-area storage use.
• 25 inch length - The 25 inch tray length gives buyers a clear starting point when matching the tray to a sink cabinet false front.
• 2-1/8 inch depth - The standard 2-1/8 inch depth helps when comparing available space behind the false front before installation.
• 3 inch height - The 3 inch tray height helps buyers gauge storage space for small sink-area items.
• One-tray configuration - The single tray format suits buyers who want one continuous tray across the selected opening.
• No tab stop - This sink tip out tray without tab stop is useful for buyers replacing a matching tray style or following a specific hardware setup.
• Rev-A-Shelf 6581 Series product type - The verified series reference helps buyers match this tray to an existing Rev-A-Shelf sink tip-out tray layout.
• Stainless steel finish - The stainless steel finish gives the tray a consistent look for sink cabinet applications.

Confirm sink tip out tray fit

Key specs to confirm: This Rev-A-Shelf sink tip-out tray is listed at 25 inches long, 2-1/8 inches deep, and 3 inches high. It is a stainless steel one-tray model in the 6581 Series and is specified without tab stop. For this product type, buyers should confirm the false-front opening width, the available depth behind the panel, and the clearance around the sink bowl, faucet hardware, and plumbing. If you are matching an existing tip out tray replacement, confirm whether your current setup uses a tray with or without tab stop. Hinge details, load details, and any compliance or installation requirements are not provided here and should be confirmed through manufacturer documentation.

What's included: Verified listing details identify one stainless steel sink tip-out tray. Hinges are not stated as included for this specific item and should be confirmed before ordering.

What to verify before ordering: Confirm tray length against your false front, confirm the standard 2-1/8 inch depth will clear obstructions, confirm the 3 inch height fits your layout, and confirm whether your project requires a sink tip out tray without tab stop and whether hinges must be ordered separately.

Compare sink tip out tray options

A sink tip out tray is typically chosen when the false front in front of a sink can be converted into useful storage for small items. In many kitchens and baths, that narrow space is otherwise unused. A buyer may be replacing a worn tray, matching an existing cabinet setup, or planning a new install where every inch of sink cabinet space matters. This Rev-A-Shelf sink tip out tray gives a verified stainless steel tray format with a 25 inch length, 2-1/8 inch depth, and 3 inch height, so the buyer can compare actual dimensions instead of guessing from a series name alone.

Use a sink tip out tray daily

For a practical daily-use scenario, an installer may be finishing a sink base cabinet and need an under sink false front tray to hold sponges, scrubbers, or small sink tools. A serious DIY buyer may be searching for sink tip out tray dimensions because the sink bowl or faucet hardware leaves limited room behind the false front. In that case, the standard 2-1/8 inch depth is one of the first dimensions to check. The 25 inch length also matters because the false front opening must support that tray size without interference.

This 6581 series sink tip out tray is also relevant for tip out tray replacement work. If the old tray was stainless steel and a similar size, this listing gives clear dimensions and identifies that the tray is without tab stop. That detail matters because tray style can affect how the replacement matches the existing setup. If your current hardware depends on a tab stop, or if your cabinet already uses a specific hinge arrangement, confirm that before purchase. The product data notes that sink tip-out hinges are available with and without hinges in the broader offering, but this listing does not verify hinge inclusion for this exact part.

Stainless steel is often selected for sink-area accessories because buyers want a tray material suited to a wet-use area. This listing verifies stainless steel construction and finish, but it does not provide load ratings or maintenance instructions. If your project has unusual usage demands, confirm those details with the manufacturer.

Compare stainless steel sink tray styles

When buyers compare sink tray options, the main differences usually come down to material, tray size, depth, and whether the tray matches the hardware style already in the cabinet. This Rev-A-Shelf sink tip out tray keeps the decision focused on verified basics: stainless steel construction, one-tray format, 25 inch length, standard 2-1/8 inch depth, 3 inch height, and no tab stop. Those are the details that help reduce ordering mistakes.

Compared with a generic tray listing that only names a series or uses broad dimensions, this product page gives the exact dimensions and tray style that matter at the cabinet. That helps a buyer compare fit against the false front and available space behind it. The Rev-A-Shelf brand and 6581 Series reference also help buyers who are trying to stay consistent with other sink tip-out tray parts in a project. For a straightforward replacement or new installation, it is often more useful to compare exact tray dimensions and tray style than to focus on broad marketing claims. If your project also requires hinges, stop style matching, or a specific installation method, those details should be confirmed before ordering so the selected sink tip-out tray matches the cabinet plan.

Check sink tip out tray questions

Order the right sink tip out tray

sink tip out tray selection is easier when the key dimensions and tray style are clear. This Rev-A-Shelf sink tip out tray gives you a verified stainless steel one-tray format at 25 inches long, 2-1/8 inches deep, and 3 inches high, with no tab stop. Before purchase, confirm your false-front opening, inside sink-cabinet clearance, and whether hinges are needed for your setup. Checking those details up front helps you order the right sink tray for a clean replacement or new installation.