Rev-A-Shelf 6591 Series Stainless Steel 14"L x 2-1/8"D x 3"H x Sink Tip Out Tray, With Tab Stop - 6591-14-6

Choose a sink tip out tray

sink tip out tray gives you a practical way to use the false drawer area at the front of a sink base cabinet. This Rev-A-Shelf sink tip out tray is a stainless steel sink tip out tray from the 6591 Series, made for buyers who want a durable sink front tray for small sink-side items. The tray measures 14 inches long, 2-1/8 inches deep, and 3 inches high. This sink tip out tray with tab stop is made of stainless steel and has a stainless steel finish. It is sold as 1 tray, and it is part of a product line that is offered with and without tab stops. If you are replacing an older tip out tray for sink cabinet use, this model is built for a clean, simple fit once dimensions are confirmed.

Use this sink front tray better

• Rev-A-Shelf stainless steel sink tip out tray - gives buyers a clear brand and product match when replacing or specifying a sink front storage tray.
• 6591 Series configuration with tab stop - helps buyers choose the version intended for applications where a tab stop is preferred.
• 14 inch length - supports fit planning for sink base false fronts where tray length must match available cabinet space.
• 2-1/8 inch depth - provides a standard tray depth for storing small sink-area items without using deeper cabinet space.
• 3 inch height - gives useful interior tray capacity for common sink front storage needs.
• Stainless steel construction - supports a durable tray body for wet-area cabinet applications near the sink.
• Stainless steel finish - gives a consistent metal appearance for buyers who want a matching tray material and finish.
• Sold as 1 tray - helps buyers order the correct quantity for a single sink cabinet opening or replacement job.
• Sink tip-out hinges available separately in the product line - reminds buyers to confirm whether sink tip out hinges are needed for their installation.

Confirm sink tip out tray fit

Key specs to confirm: This Rev-A-Shelf sink tip out tray is listed at 14 inches long, 2-1/8 inches deep, and 3 inches high. Buyers should confirm the false drawer front opening, inside clear width, and available depth behind the sink front before ordering. Because this model is the version with tab stop, buyers should also confirm that this configuration matches the way their sink front tray is intended to open and stop. If hinge style, mounting pattern, or door front compatibility is critical for your job, verify those details with the manufacturer or technical documentation before purchase. Any safety, load, compliance, or installation rating details are not provided here and should be confirmed separately.

What's included: One Rev-A-Shelf 6591 Series stainless steel sink tip out tray with tab stop is included. Hinges are not verified as included with this item and should be confirmed before ordering.

What to verify before ordering: Confirm tray length, tray depth, tray height, sink base false front size, needed hinge type, and whether your project requires the tab stop version. Also confirm if you need one tray or more than one for the cabinet layout.

Compare stainless steel tip out tray options

Match the sink tip out tray use

A sink tip out tray is commonly used in the false front area of a sink base cabinet, where standard drawer storage is not available. For installers, remodelers, and serious DIY buyers, that space often becomes a practical place to keep small items used at the sink. A stainless steel tip out tray can help organize compact tools and accessories that would otherwise sit loose under the sink or on the countertop.

This Rev-A-Shelf sink tip out tray fits buyers who already know they need a 14 inch tray and want a stainless steel construction. The verified dimensions matter because sink base cabinets can vary by opening width, clearance behind the false front, and hinge setup. If you are handling a sink tip out tray replacement, matching the existing tray length and checking the available depth are usually the first steps. If you are planning a new tip out tray for sink cabinet installation, confirm that the false front can accept the tray height and that your chosen sink tip out hinges work with the cabinet front and tray layout.

The tab stop version is important for buyers comparing similar trays in the same category. Since this product is specifically listed as a sink tip out tray with tab stop, it is best suited for projects where that detail is required rather than optional. The product line is offered with and without tab stops, so buyers should not assume all trays in the series are configured the same way. This matters when replacing a damaged sink front tray or trying to match an existing installation method.

Because the tray is stainless steel with a stainless steel finish, it is a sensible fit for sink-area use where moisture is a normal concern. The listed 2-1/8 inch depth is described as standard in the product line, which helps buyers looking for a familiar tray profile. For a clean order process, verify the cabinet opening, confirm whether hinges are already on site, and make sure one tray is the correct pack quantity for the job.

Compare sink tip out tray build details

When buyers compare sink tip out trays, the most useful differences are usually material, dimensions, included quantity, and configuration details such as tab stops. This Rev-A-Shelf 6591 Series tray gives clear verified information in those areas. It is a stainless steel sink tip out tray, it measures 14 inches long by 2-1/8 inches deep by 3 inches high, and it is sold as 1 tray. Those facts make it easier to compare against a current tray in the field or a cabinet opening on a jobsite.

In generic comparisons, some trays may look similar at a glance but differ in depth, stop style, or whether mounting hardware is included. This is why exact fit confirmation matters more than appearance alone. A buyer choosing a sink tip out tray replacement should focus on dimensions first, then confirm whether the project needs a tray with tab stop and whether sink tip out hinges must be ordered separately. A buyer specifying a new sink front tray should also confirm that the false front panel and cabinet construction allow proper movement once installed.

Rev-A-Shelf is clearly identified as the brand, and the 6591 Series gives a useful series reference for matching related items in the same family. The stainless steel body and finish provide a straightforward material choice for sink cabinet applications. Rather than relying on broad claims, this product supports a confident purchase by giving the measurements, material, series, and tray count needed for a practical fit check before ordering.

Ask fit questions before ordering

Order the right sink tip out tray

sink tip out tray selection is easier when you match the tray size, material, and configuration to the cabinet opening before you buy. This Rev-A-Shelf sink tip out tray includes one stainless steel tray in the tab stop version, sized at 14 inches long, 2-1/8 inches deep, and 3 inches high. Before purchase, confirm false front clearance, hinge needs, and whether this 6591 Series tray matches your replacement or new installation plan.