Rev-A-Shelf 6581 Series Stainless Steel 22"L x 2-1/8"D x 3"H x Sink Tip Out Tray, No Tab Stop - 6581-22-5

Choose a stainless steel sink tip out tray

stainless steel sink tip out tray gives you a narrow storage option at the front of a sink base where a false drawer panel is used. The Rev-A-Shelf sink tip out tray in this listing is a stainless steel tip out tray from the Rev-A-Shelf 6581 series, made for buyers who need a defined tray size and a no tab stop design. This sink tip out tray measures 22 inches long, 2-1/8 inches deep, and 3 inches high. It is built from stainless steel with a stainless steel finish. For a sink tip out tray replacement or a new sink tip out tray for kitchen sink cabinet projects, this model is intended for applications where the tray dimensions and no tab stop format match the opening and hardware setup already in use or planned for the cabinet.

See practical gains from this sink tip out tray

• Rev-A-Shelf stainless steel sink tip out tray - gives installers and cabinet shops a clearly identified brand and product type for replacement matching or new sink base planning.
• 22 inch length - helps buyers match the tray to a false-front width that can accept a longer sink tip out tray.
• 2-1/8 inch depth - supports use in tight space at the front of a sink cabinet where shallow storage is needed.
• 3 inch height - provides a defined tray wall height for holding small sink-area items once the false front is opened.
• Stainless steel construction - gives the sink tip out tray a metal build suited to wet-area cabinet accessory use.
• Stainless steel finish - keeps the tray material and finish aligned for a consistent look inside the sink base area.
• No tab stop design - helps buyers who specifically need a tip out tray no tab stop format for their chosen hinge setup or replacement application.
• Rev-A-Shelf 6581 series product - makes it easier to identify the correct series when matching existing trays or ordering additional units for similar cabinet builds.
• Single tray listing - helps buyers understand this product is the tray itself and that hinge needs should be reviewed separately before ordering.

Confirm sink tip out tray fit and contents

Key specs to confirm: This sink tip out tray is listed as 22 inches long, 2-1/8 inches deep, and 3 inches high. It is a Rev-A-Shelf stainless steel sink tip out tray with a no tab stop design. Before purchase, confirm the false drawer front width, the available space behind the panel, and the hinge style you plan to use. The product data states that sink tip-out hinges are available with and without hinges, so buyers should verify hinge requirements for this specific tray order. If any load, compliance, or other technical requirements apply to your project, those details are not provided here and should be confirmed through the manufacturer or technical documentation.

What's included: One Rev-A-Shelf 6581 series stainless steel sink tip out tray. Hinges or other mounting hardware should be confirmed before ordering because the listing does not verify that they are included.

What to verify before ordering: Confirm tray length against the false-front opening, confirm that 2-1/8 inch depth and 3 inch height fit your sink cabinet space, confirm that a no tab stop tray is the correct format for your application, and confirm whether hinges are needed for your install or replacement.

Compare sink tip out tray options for install

Use a sink tip out tray for access

A sink tip out tray is commonly used in a kitchen or bath sink base where the front panel below the countertop looks like a drawer but actually tilts out. In that space, buyers often want a simple place to hold small items such as sponges, scrubbers, or other sink-area accessories. A stainless steel sink tip out tray works well when the project calls for a shallow tray that fits into the narrow area behind that false front.

This Rev-A-Shelf sink tip out tray is sized for buyers who need a 22 inch tray with a 2-1/8 inch depth and a 3 inch height. Those dimensions matter because sink bases vary, and the available space behind the panel can be reduced by sink bowls, clips, or cabinet construction. For a sink tip out tray for kitchen sink cabinet use, the first job is to confirm that the false front and the clearance behind it can accept the tray without interference.

The no tab stop detail is also important. Buyers looking for a sink tip out tray replacement often need to match an existing tray style, not just the length. If your current setup uses a tip out tray no tab stop design, this listing may align with that requirement. If you are building a new cabinet or changing hardware, confirm that the tray style matches the hinge and opening action you want to use. The product data notes that sink tip-out hinges are available with and without hinges, but it does not verify hinge inclusion for this item.

For cabinet shops, remodelers, and serious DIY buyers, the value here is straightforward: a defined Rev-A-Shelf 6581 series tray in stainless steel with stated dimensions. That makes it easier to plan a sink front storage area, replace a worn tray, or standardize parts across multiple cabinets where the same size is needed. If your project has unique clearance issues, unusual panel construction, or strict jobsite requirements, confirm those details before you order.

Compare stainless steel tip out tray details

When buyers compare sink tip out tray options, the most useful differences are usually material, dimensions, tray style, and whether the product is the tray only or part of a hinge set. This listing is clear on the tray itself: it is a Rev-A-Shelf 6581 series stainless steel tip out tray with a stainless steel finish, 22 inch length, 2-1/8 inch depth, 3 inch height, and no tab stop.

That clarity helps avoid a common ordering mistake. Many sink tip out tray orders fail because the buyer chooses by length alone and overlooks depth, height, or tray style. A tray that is too deep may interfere with the sink or cabinet rail. A tray that is too tall may not sit correctly behind the false front. A tray with the wrong stop format may not match the hardware plan. For that reason, this product is best evaluated as a fit-driven cabinet accessory rather than a generic replacement part.

Stainless steel construction is another practical point in comparison. For a sink base application, buyers often prefer a metal tray when they want a defined material and finish that matches the wet-area setting. The product data verifies stainless steel construction and finish, which gives you a clear material callout for specifications, estimating, and repeat purchasing.

Brand consistency also matters in trade work. Rev-A-Shelf is the verified brand on this sink tip out tray, and the series identification helps buyers align future orders with the same product family. If you are comparing trays for a multi-cabinet job, use the listed dimensions and no tab stop format as the main checkpoints, then confirm hinge needs and cabinet clearance before finalizing the order.

Get answers on sink tip out tray fit

Order the right Rev-A-Shelf sink tip out tray

Rev-A-Shelf sink tip out tray is a practical choice when you need a stainless steel tray with defined dimensions and a no tab stop format. This listing verifies one tray at 22 inches long, 2-1/8 inches deep, and 3 inches high. Before purchase, confirm your false-front opening, sink base clearance, and whether hinges are required for your installation. Checking those details up front helps you match the tray to the cabinet and avoid delays from ordering the wrong sink tip out tray.