Rev-A-Shelf 6581 Series Stainless Steel 28"L x 2-1/8"D x 3"H x Self-close Sink Tip Out Tray, No Tab Stop - 6581-28-4

Choose this sink tip out tray

sink tip out tray gives you a narrow storage area at the sink front while keeping a clean finished look on the cabinet. The Rev-A-Shelf sink tip out tray in the 6581 Series is a stainless steel sink tip out tray with a self-close design, a 28 inch length, 2-1/8 inch depth, and 3 inch height. This sink cabinet accessory is made of stainless steel with a stainless steel finish and is offered as a no tab stop version. The product data identifies this item as a premium sink front tray in the Rev-A-Shelf 6581 and 6591 Series family. The SAP description also identifies a tray and hinge set, which helps buyers looking for sink tip out hinges confirm what to review before ordering.

See practical gains from this sink front tray

• Rev-A-Shelf 6581 Series sink tip out tray - gives buyers a clearly identified tray style for sink front storage and replacement planning.
• Stainless steel construction - helps match projects that call for a metal sink front tray rather than plastic.
• Stainless steel finish - provides a consistent appearance for visible sink cabinet accessory applications.
• Self-close sink tip out tray design - supports smoother closing action for repeated daily use at the sink cabinet.
• 28 inch tray length - helps buyers match the tray to wider sink front openings where this size is appropriate.
• 2-1/8 inch tray depth - gives a defined shallow profile for the narrow space commonly found behind a false drawer front.
• 3 inch tray height - helps confirm interior clearance needs before install.
• No tab stop configuration - lets buyers choose this specific tray style when tab stop hardware is not part of the planned setup.
• Rev-A-Shelf premium sink tip-out tray line - helps buyers stay within a known brand family when replacing an existing tip out tray stainless steel unit.

Confirm sink tip out tray fit details

Key specs to confirm: This Rev-A-Shelf sink tip out tray is listed at 28 inches long, 2-1/8 inches deep, and 3 inches high. Buyers should confirm the false drawer front width, the usable space behind that front, and the cabinet construction around the sink before ordering. This product is a self-close, no tab stop tray made of stainless steel with a stainless steel finish. Because fit can depend on the sink bowl, mounting method, and front panel layout, confirm hinge position and clearance with the manufacturer or technical documentation if your application is tight. Safety, load, compliance, and any installation tolerance details are not provided here and should be confirmed with the manufacturer or technical documentation.

What's included: Verified product data confirms a Rev-A-Shelf stainless steel sink tip out tray. The SAP description indicates a tray and hinge set. If you need exact hardware count or mounting details, confirm included items before ordering.

What to verify before ordering: Check cabinet false front width, sink and faucet clearance, tray length fit, tray depth fit, required self-close hardware layout, and whether your project requires a no tab stop tray. Also confirm that the included or planned sink tip out hinges match your cabinet front and installation method.

Compare this stainless steel sink tip out tray

Use a self-close sink tip out tray

A self-close sink tip out tray is commonly used when a sink base has a false drawer front that would otherwise be unused. In many kitchens and baths, installers and serious DIY buyers want a place for small sink-side items without changing the cabinet face. This Rev-A-Shelf sink tip out tray is built for that narrow area and gives you a defined tray size of 28 inches by 2-1/8 inches by 3 inches.

This use case matters most when you are replacing an older sink front tray, updating a sink cabinet accessory, or planning a new sink base where every inch counts. A stainless steel sink tip out tray can make sense when the buyer wants a metal tray with a stainless steel finish rather than another material. The self-close design is also relevant for homes or work spaces where the false front is opened often during daily sink use.

Another common scenario is a tip out tray replacement where the old tray size is known but the hinge style or stop style must be checked. This item is identified as a no tab stop version, so that detail should be matched to the existing setup or to the intended hardware plan. The SAP description references a sink tip out tray hinge set, which is useful for buyers who are trying to avoid piecing together tray and hinge components separately. If your project depends on a specific hinge count, exact mounting pattern, or exact self-close mechanism details, those points should be confirmed before purchase.

For remodel work, the main pain point is usually interference. The sink bowl, faucet hardware, clips, and the back side of the false drawer front can all reduce usable space. That is why the verified dimensions matter more than general series compatibility. Confirm the 28 inch length against the opening, the 2-1/8 inch depth against available interior space, and the 3 inch height against the cabinet front and sink clearance. Follow manufacturer installation guidance and local building requirements where applicable.

Compare sink tip out tray build choices

When buyers compare sink tip out tray options in general, the most useful differences are usually material, closure style, dimensions, and stop configuration. This Rev-A-Shelf model gives you verified stainless steel construction, a stainless steel finish, self-close operation, and a no tab stop layout. Those are concrete details that help narrow the choice without relying on guesses.

In practical terms, a tray with clear dimensions is easier to evaluate for replacement work than a listing that only names a series. Here, the tray size is stated, which helps installers compare the existing sink front tray to the new part before drilling or mounting. The brand also matters for buyers who already use Rev-A-Shelf cabinet accessories and want product family consistency across a project.

Generic sink tip out tray comparisons should also focus on what is not stated. If you need exact hinge specifications, a detailed parts list, mounting screws, load guidance, or technical drawings, confirm those items before ordering. That approach is especially useful on sink base jobs where access is tight and rework takes extra time. For buyers who want a tip out tray stainless steel model with self-close action and a verified no tab stop configuration, this product gives a clear starting point for fit and installation review.

Check sink tip out tray ordering questions

Order the right Rev-A-Shelf sink tip out tray

Rev-A-Shelf sink tip out tray is a practical choice when you need a stainless steel sink front tray with self-close action and verified dimensions. Before purchase, confirm the 28 inch length, 2-1/8 inch depth, 3 inch height, and the no tab stop configuration against your cabinet and sink clearance. Also verify included hardware if your install depends on a complete sink tip out tray hinge set. Careful fit checks help prevent ordering mistakes and make replacement or new installation work more predictable.