Pro Value Series Appliance Pull Weathered Nickel 8" (203 mm) Center to Center, -SZAPPL1-WN

Pro Value Series Appliance Pull For Appliances

Pro Value Series appliance pull in weathered nickel gives appliance doors or large cabinet fronts a matching handle with an 8 inch center to center layout, so hole spacing aligns with common appliance-style drilling patterns on wider fronts. The zinc die cast material builds a solid pull body, which supports confident hand leverage when opening heavier doors or oversized drawer fronts. The weathered nickel finish creates a muted metal look, which helps hardware visually tie together with brushed or aged nickel hinges and adjoining decorative hardware on the same run. An overall length of 8-5/8 inches means the handle extends slightly beyond the 8 inch fastener spread, giving clear grip area at both ends for gloved or larger hands. A projection of 2 inches stands the pull off the surface, providing knuckle clearance when grabbing from the side on deep panels. A width of 3/4 inch adds a comfortable, stable contact surface across the fingers.

Key Appliance Pull Details For Daily Use

• The 8 inch center to center drilling length sets consistent fastener spacing, which simplifies layout on appliance panels or tall cabinet doors following standard pull patterns in a shop or jobsite workflow.
• The 8-5/8 inch overall length provides a little extra bar beyond the mounting points, which helps users catch the handle from either end when doors swing wide or when reach is limited by nearby cabinets.
• The 2 inch projection holds the pull away from the door face, which creates working space for fingers and knuckles and supports easier gripping on thicker appliance panels or paneled fronts.
• The 3/4 inch width across the pull offers a broader grasp surface, which spreads hand pressure and supports steadier pulling force on heavier or fully loaded appliance doors.
• The weathered nickel finish establishes a specific tonal match point, which supports coordinated hardware runs where decorative pulls, knobs, and hinges share the same finish family.
• The zinc die cast construction forms a rigid pull body, which supports repeatable performance in typical cabinet and appliance front environments.

Mounting And Fit Details For This Appliance Pull

The 8 inch center to center dimension defines the mounting hole distance for this appliance pull, which lets installers drill or bore repeatable hole patterns across multiple doors using the same jig spacing. With an overall 8-5/8 inch length, the pull positions slightly wider than its fastener spread, which can help align it visually on larger appliance panels without crowding the stile edges. The 2 inch projection sets how far the bar stands off the door surface, which helps maintain clearance over edge profiles or applied rails on thicker fronts. A 3/4 inch width through the grip area defines the front face of the handle, which supports a balanced look on full-height panels or wide drawer faces where narrow pulls might appear undersized. The specified 10-24 x 1-1/4 screw size interfaces with the pull, which sets expectations for thread type when matching to drilled pilot holes in appliance or cabinet substrates.

Using This Weathered Nickel Appliance Pull In Projects

Where This 8 Inch Appliance Pull Fits Best

The 8 inch center to center drilling of this Pro Value Series appliance pull suits appliance fronts or tall cabinet doors that are laid out for longer handle spans, which helps hardware scale properly with door height. Its 8-5/8 inch overall length makes the pull visible and reachable along broader panels, supporting use on pantry units or integrated appliance doors that benefit from a longer gripping bar. The 2 inch projection allows hands to wrap behind the pull, which is useful on thicker appliance panels where shallow pulls can feel tight against the face. With a 3/4 inch width, the handle carries enough visual weight to sit proportionally on large doors while still working on wide drawers in the same run. The weathered nickel finish ties into other weathered nickel decorative hardware, which helps create a unified appearance across mixed cabinet and appliance fronts in the same space.

Why These Dimensions Support Repeatable Results

The consistent 8 inch center to center measurement on this appliance pull lets installers rely on a single drill guide setup, which reduces layout variation when hardware repeats across multiple doors. Because the length steps up slightly to 8-5/8 inches, the pull keeps mounting points inside while extending the grip zone, which supports comfortable hand positioning without changing the drilling template. The 2 inch projection distance establishes a predictable stand-off from the surface, which helps doors clear adjacent faces when fingers pull from the side near tight reveals. A 3/4 inch width standardizes the visible bar thickness, which helps drafters and shop teams anticipate how the pull will read against stile and rail dimensions on shop drawings. Using zinc die cast construction creates a uniform body, which supports consistent feel across all installed pulls in a project. The SZAPPL1-WN identifier links these dimensions, finish, and material to a single repeatable part reference.

Common Questions About SZAPPL1-WN Appliance Pull

Choose This Pull For 8 Inch Appliance Layouts

The Pro Value Series appliance pull SZAPPL1-WN pairs an 8 inch center to center drilling with 8-5/8 inch overall length, which suits appliance fronts and tall cabinet doors laid out for longer handles. Its weathered nickel finish coordinates with matching decorative hardware, while the zinc die cast construction, 2 inch projection, and 3/4 inch width set a predictable feel across multiple installs. For projects calling for an 8 inch center to center weathered nickel appliance pull, this part provides a clear, repeatable specification.