Pro Value Series appliance pull gives you an 8 inch (203 mm) center to center grip that matches common appliance handle layouts, so alignment stays consistent across panels. The 9-1/8 inch overall length provides a substantial handhold, which supports confident operation on heavier appliance fronts. Zinc die cast construction forms a solid body, helping the pull feel firm when mounted to appliance or cabinet panels. The satin nickel finish presents a muted metallic look that pairs with many satin nickel hinges and knobs, helping visual lines stay consistent on full kitchen runs. A 1-3/8 inch projection sets the handle out from the surface, creating enough clearance for fingers without pushing the pull too far into walk paths. The 3/4 inch width gives the grip a balanced profile, which helps it feel comfortable without looking oversized on standard appliance panel widths.
This appliance pull is designed around an 8 inch center to center dimension, so drilling two straight, level holes at that spacing sets the mounting geometry. The 10-24 x 1-1/4 inch screw size specification defines the threaded interface, which lets the pull fasten securely through standard appliance or cabinet panels drilled for that thread. With a 1-3/8 inch projection and 3/4 inch width, the pull occupies a compact envelope off the surface, which helps keep it clear of adjacent doors yet still comfortable in the hand. The 9-1/8 inch overall length works well when aligned vertically on tall panels or horizontally on wider drawers, so layout options stay flexible while holding the same drilling pattern.
This pull belongs to the Appliance Pulls collection, so it is built for appliance-style applications where a longer handle improves leverage. The 8 inch center to center drilling dimension lines up well with many appliance panel layouts, helping designers and installers coordinate across dishwashers, refrigerator panels, or large cabinet doors that benefit from an appliance-style grip. Because the overall length is 9-1/8 inches, the pull visually anchors taller fronts without overpowering medium-width doors. The satin nickel finish lets it sit comfortably beside other satin nickel decorative hardware and moldings in the same project. With a 3/4 inch width, it reads as a substantial yet streamlined handle, which suits both contemporary and transitional kitchen designs using similar hardware proportions.
The clearly defined 8 inch center to center measurement simplifies layout when repeating the pull across multiple fronts, since installers can transfer the same hole spacing from a template or story stick. Zinc die cast construction provides a consistent form around the mounting posts, which supports stable contact against the panel once tightened. The 1-3/8 inch projection and 3/4 inch width together create a predictable grip geometry for users, reducing variation in how the pull feels from one door to the next. The satin nickel finish covers the pull with an even surface, which helps it present uniformly under kitchen lighting along a bank of appliance and cabinet fronts. The specified length of 9-1/8 inches sets clear endpoints relative to door edges or panel reveals, assisting installers in aligning multiple pulls to the same visual reference line across a run.
This appliance pull has an 8 inch (203 mm) center to center, so drilling holes at that spacing sets the mounting points and keeps alignment consistent across multiple fronts.
The pull measures 9-1/8 inches in overall length, giving extra handle beyond the mounting points so the grip feels substantial on taller appliance panels or large cabinet doors.
The pull is zinc die cast, creating a solid metal body that supports a firm feel when fastened to appliance or cabinet panels in everyday kitchen use.
This appliance pull has a 1-3/8 inch projection and 3/4 inch width, giving comfortable finger clearance while keeping a slim profile on doors and panels.
The pull uses 10-24 x 1-1/4 inch screws, so the threaded connection is defined for mounting through panels drilled to suit that screw length and thread.
The SZAPPL3-SN appliance pull has a satin nickel finish, which coordinates with other satin nickel decorative hardware throughout a kitchen or similar project.
The Pro Value Series appliance pull in satin nickel combines an 8 inch center to center layout with a 9-1/8 inch overall length, so it fits appliance-style fronts while keeping a consistent drilling pattern. Zinc die cast construction and the 1-3/8 inch projection with 3/4 inch width create a comfortable, predictable grip across doors and panels. By matching this satin nickel finish and SZAPPL3-SN specification, you can align visual lines and mounting details across your next appliance or cabinet hardware run.
Sold In: 1 Each
