Pro Value Series appliance pull in weathered nickel gives appliance fronts a consistent 12 inch center to center grip, which helps align with standard appliance panel drilling and keeps layouts uniform across a run of doors or panels. The zinc die cast material provides a solid metal body, supporting the weight and leverage typical on large panels. The 13 inch overall length leaves a small margin beyond the 12 inch center to center dimension, which creates visible grip area at each end while keeping hole spacing predictable. A 2-3/8 inch projection sets the handle off the surface, giving fingers room to wrap behind the pull when opening heavier appliance fronts. The 1 inch width creates a substantial grasping surface along the bar, which helps with control when moving tall or heavy panels during everyday use.
The 12 inch center to center dimension defines the mounting hole spacing, so drilling templates can be set once for this distance and reused across multiple doors without layout changes. With an overall 13 inch length, the pull positions its mounting points slightly inward from each end, helping keep screw locations away from door edges while still presenting a full-length handle. The 2-3/8 inch projection also factors into planning, since this stand-off distance indicates how far the handle will extend into walkways or against adjacent fronts when doors open. A 1 inch width describes the front view footprint, which helps when checking that the pull will sit comfortably on the stile or rail width available on an appliance panel.
This appliance pull from the Pro Value Series is defined as part of the Appliance Pulls collection, so it is designed for use in locations where a larger pull size is appropriate, such as appliance panels or wider cabinet fronts. The 12 inch center to center spacing suits applications that benefit from a long grip, giving two hands space along the 13 inch length when operating tall or heavy doors. Its 1 inch wide bar appears substantial on broader door faces, matching the scale often preferred on appliance fronts. The weathered nickel finish helps this pull visually tie into other weathered nickel decorative hardware and moldings, coordinating within the same project where that finish family is specified.
The zinc die cast material provides the structural core of the pull, so every unit in this model shares the same solid metal body for consistent feel across multiple installations. A 2-3/8 inch projection gives a known stand-off distance that helps designers and installers anticipate hand clearance behind the pull, which can reduce interference with panel edges or adjacent hardware lines. The 10-24 x 1-1/4 screw size specification ties directly to the mounting interface, enabling coordination with correctly threaded points in doors or panels for a secure attachment. Combined with the fixed 12 inch center to center spacing, these details allow layouts to be repeated accurately on matching appliance fronts or large cabinet doors, supporting straight lines and consistent pull heights across a bank of units.
The Pro Value Series appliance pull has a 12 inch center to center spacing, which sets the drilling distance between mounting holes for consistent layout on doors or appliance panels.
The appliance pull measures 13 inches in overall length, so it extends slightly beyond the 12 inch mounting span to give a full-length grip on wider doors or appliance fronts.
The SZAPPL5-WN appliance pull is made from zinc die cast, providing a solid metal body that supports repeated use on larger doors or panel fronts.
This weathered nickel appliance pull projects 2-3/8 inches from the mounting surface, allowing finger clearance behind the bar when gripping appliance or cabinet fronts.
The pull has a 1 inch width, creating a broad front profile that offers a substantial gripping surface along the length of the handle.
This appliance pull is specified with a 10-24 x 1-1/4 screw size, which identifies the thread and length needed to secure it to doors or panels.
The Pro Value Series appliance pull in weathered nickel combines a 12 inch center to center layout with a 13 inch overall length, aligning well with larger appliance fronts or wide cabinet doors. With zinc die cast construction, a 2-3/8 inch projection, and a 1 inch width, the pull offers a defined grip area sized for appliance applications. When a project calls for an SZAPPL5-WN appliance pull that matches weathered nickel decorative hardware and predictable mounting dimensions, this model provides those stated measurements for consistent installation.
Sold In: 1 Each
