Pro Value Series appliance pull in satin nickel gives a consistent handle solution for appliance fronts or oversized cabinet doors where a 12 inch center to center layout is required. The 12 inch (305 mm) center to center dimension locates mounting holes predictably, which simplifies drilling jigs and repeat layouts across multiple fronts. The pull body is made from zinc die cast material, which provides a rigid structure that supports frequent gripping on heavy doors. A satin nickel finish on the pull creates a low-sheen metal surface, which helps visually coordinate with other satin nickel decorative hardware in the same run. The overall 13 inch length spans wider rails effectively, which helps the pull look properly scaled on larger panels. A 2-3/8 inch projection spaces the gripping surface off the face, which creates working clearance for fingers when operating thick doors.
The 12 inch (305 mm) center to center mounting dimension on this satin nickel appliance pull sets the distance between fastener locations, which supports precise alignment with standard appliance handle drilling patterns. The 13 inch overall length of the pull leaves short extensions beyond the posts, which helps installers visually center the handle on wide rails while keeping screw points within the structural portion of the stile. A 2-3/8 inch projection from the door surface determines how far the bar stands off the front, which affects finger clearance when gripping from the side. The 1 inch width of the pull defines its front face, which influences how far it overlaps rail or stile edges when positioned near door margins.
This Pro Value Series appliance pull is designed for use where a 12 inch center to center handle span suits the door or panel width, such as appliance fronts or tall cabinet doors that benefit from a longer gripping surface. The satin nickel finish ties into satin nickel decorative hardware, which allows the pull to run across multiple doors in a kitchen or workspace without finish mismatch. The 13 inch overall length enables the handle to sit proportionally on larger fronts, which helps tall pantry or appliance doors avoid looking under-scaled by a shorter pull. With a 1 inch width, the face of the pull presents a noticeable gripping area, which can be useful on heavy doors that are opened frequently during daily work.
The 12 inch center to center spacing on the SZAPPL5-SN appliance pull provides a fixed drilling pattern, which helps installers set up jigs or templates for repetitive installations across multiple cabinets or appliances. The 2-3/8 inch projection keeps the gripping bar clear of the door surface, which supports easier hand access when approaching the handle from different angles along a run of cabinets. Zinc die cast construction creates a single molded body, which contributes to a uniform feel from one pull to the next in multi-door layouts. The satin nickel finish on this decorative appliance pull maintains a consistent tone, which simplifies coordinating with satin nickel hinges, knobs, or other pulls specified on the same job.
This appliance pull has a 12 inch (305 mm) center to center dimension, which sets the hole spacing for drilling and keeps multiple handles aligned on a run of doors.
The Pro Value Series appliance pull has a 13 inch overall length, which allows the handle to span wider rails and suit large cabinet or appliance fronts visually and functionally.
The SZAPPL5-SN appliance pull is made from zinc die cast, which forms a solid molded handle body suitable for frequent gripping on cabinet and appliance doors.
This appliance pull has a satin nickel finish, which provides a low-sheen metallic look that coordinates with other satin nickel decorative hardware.
The pull projects 2-3/8 inches from the door surface, which creates hand clearance behind the bar when operating thick cabinet or appliance fronts.
This appliance pull has a 1 inch width, which defines a substantial face profile for gripping while keeping the handle suitable for use on a variety of stile widths.
The Pro Value Series appliance pull in satin nickel combines a 12 inch center to center layout with a 13 inch overall length, which aligns well with larger doors that need a longer handle span. Zinc die cast construction and a 1 inch wide face provide a solid gripping surface, which is useful on frequently used cabinet or appliance fronts. A 2-3/8 inch projection off the surface supplies working clearance for hands, which supports comfortable operation in everyday use. For projects specifying satin nickel decorative hardware with a 12 inch center to center requirement, this SZAPPL5-SN appliance pull aligns the key dimensions and finish into a single handle choice.
Sold In: 1 Each
