Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Series appliance pull in oil rubbed bronze provides a defined 8 inch center to center grip span, which sets consistent drilling points across appliance panels and helps align multiple pulls in a straight visual line. The zinc die cast construction creates a rigid handle body, which supports a solid feel when operating heavier appliance doors. The oil rubbed bronze finish establishes a dark, uniform appearance, which lets this pull visually coordinate with other bronze decorative hardware on the same job. The overall 8-3/4 inch length gives generous hand clearance from edge to edge, which supports a confident grasp when opening or closing large fronts. A 2 inch projection stands the pull off the surface at a fixed distance, which keeps fingers clear of the panel while still keeping the handle close to the door face.
The defined 8 inch center to center hole spacing on this pull gives a fixed mounting pattern, which lets installers drill repeating rows on multiple appliance or door panels using the same measurements each time. Its 2 inch projection and 7/8 inch width create a predictable clearance envelope from the face of the door, which helps when checking swing paths or adjacent hardware spacing. The 8-3/4 inch length provides clear start and end points for layout, which supports accurate positioning relative to stiles, rails, or panel edges on appliance fronts and tall cabinet doors.
This appliance pull from the Appliance Pulls collection is designed for use on appliance panels and similar large fronts where an 8 inch center to center handle is specified, so it suits layouts built around that exact hole spacing. The 8-3/4 inch overall length pairs well with tall or wide doors, because the longer bar spans more of the panel and creates a substantial hand area for opening heavy appliance doors. Its oil rubbed bronze finish aligns with projects using bronze-toned decorative hardware, so it can be used across appliance fronts and adjacent cabinet doors to maintain a consistent visual line in the run.
The zinc die cast construction supports use across multiple openings on a job, because the material allows the same shape and dimensions to repeat from pull to pull. The 2 inch projection gives enough stand-off for fingers behind the bar on thicker appliance panels, which helps when users pull at different angles or with full hands. The 7/8 inch width offers a defined gripping surface, which suits installations where occupants prefer a more substantial handle rather than a narrow pull.
The 8 inch center to center measurement provides a clear drilling dimension, which allows jigs or templates set for 8 inch spacing to be used for consistent mounting across all appliance panels in a kitchen. The fixed 2 inch projection defines how far the handle will extend into the room, which aids in planning clearance between doors, adjacent cabinets, and nearby obstacles along the appliance run. The 8-3/4 inch length and 7/8 inch width give precise outer dimensions, which are useful when aligning this pull with trim lines, panel reveals, and neighboring handles for a clean, straight sightline.
The 10-24 x 1-1/4 inch screw size specification describes the threaded connection used to fasten the pull, which helps when preparing mounting through typical appliance or cabinet panel thicknesses designed for that screw length. The oil rubbed bronze finish provides a consistent surface color across each pull, which supports uniform appearance when the same SZAPPL2-ORB appliance pull is repeated on multiple doors and drawers in the same installation.
This Pro Value Series appliance pull has an 8 inch center to center dimension, which sets fixed hole spacing for drilling and helps align multiple pulls evenly across appliance and cabinet fronts.
The SZAPPL2-ORB appliance pull is 8-3/4 inches long, which provides a generous gripping area and helps the handle visually span more of the appliance or cabinet panel.
This appliance pull is zinc die cast, which creates a solid metal handle body with consistent shape and dimensions from unit to unit on a project.
The appliance pull projects 2 inches from the mounting surface, which provides finger clearance behind the bar while keeping the handle reasonably close to the door face.
This Pro Value Series appliance pull has an oil rubbed bronze finish, which gives a dark, unified appearance that coordinates with other oil rubbed bronze decorative hardware.
This appliance pull specifies 10-24 x 1-1/4 inch screws, which defines the thread and length used to fasten the handle through typical appliance or cabinet panels.
This Pro Value Series appliance pull with 8 inch center to center spacing, 8-3/4 inch length, and 2 inch projection gives a defined set of dimensions that support repeatable layouts on appliance panels. The zinc die cast construction and oil rubbed bronze finish match projects needing a solid metal handle with a dark bronze appearance. Use this SZAPPL2-ORB appliance pull when an 8 inch drilling pattern and a substantial, 7/8 inch wide grip are specified for coordinated appliance and cabinet fronts.
Sold In: 1 Each
