Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Series appliance pull describes a zinc die cast handle designed as an appliance pull, so it provides a solid gripping point on appliance fronts where a longer bar is needed for leverage. The 12 inch (305 mm) center to center dimension defines the mounting hole spacing, which lets you plan drilling or retrofit work around a clear, repeatable measurement. The weathered nickel finish identifies a muted metallic look that coordinates with many appliance and cabinet finishes without looking overly bright. The 13-3/8 inch overall length means the pull extends past the mounting holes at both ends, giving more hand room along the bar. The 1-11/16 inch projection states how far the pull stands off the surface, creating clearance for fingers during daily use. The 1-1/8 inch width describes the front-to-back profile, which helps you visualize scale against door faces.
The screw size of 10-24 x 1-1/4 inch specifies the threaded fastener interface, which tells you this pull mounts using machine screws that engage 10-24 threads for a secure connection into the door or mounting inserts. The 1-1/4 inch length dimension helps you understand how deep the screw can engage material, which is useful when planning for appliance door thicknesses or backing blocks. The 12 inch center to center spacing gives a fixed distance between the screw holes, so layout on the door face can be done accurately with simple measurements or jigs. Together, the defined screw size and center spacing support consistent mounting from one appliance front to the next.
The appliance pull classification places this Pro Value Series handle in applications on appliance fronts rather than small cabinet doors, so it suits tall or wide doors that benefit from a two-handed grip. With a center to center distance of 12 inches, the pull works on appliance panels laid out for that common long-pull spacing, which streamlines using it across multiple matching units. The 13-3/8 inch overall length creates a handle span that feels proportional on full-height or overlay appliance fronts, supporting a balanced look when lined up with adjacent cabinet hardware. The weathered nickel finish ties the pull to other weathered nickel decorative hardware, which helps keep a consistent hardware theme across a kitchen or similar workspace. The 1-11/16 inch projection allows the pull to stand proud of applied door panels, supporting a comfortable grip even when the appliance door has thicker decorative cladding.
The specified 10-24 x 1-1/4 inch screw size means each mounting point uses a standardized machine thread, which aids repeatable installation across multiple pulls with common drill and tap setups or threaded inserts. A 12 inch center to center dimension provides a single reference number for jigs or drilling templates, which reduces layout time when several appliance fronts share the same design. The zinc die cast material creates a consistent molded form from pull to pull, which supports uniform alignment when you are installing a run of matching handles. The 1-1/8 inch width gives a predictable face dimension, which lets you align the pull visually with door edges or panel reveals for a straight, even hardware line. The weathered nickel finish is defined on this model, so when you specify this pull you can match it to other weathered nickel components from the same workspace plan.
The Pro Value Series appliance pull has 12 inch (305 mm) center to center mounting, which sets the distance between holes and simplifies layout on appliance doors.
The appliance pull measures 13-3/8 inches in overall length, giving extra bar length beyond the 12 inch mounting centers for improved grip on larger doors.
The Pro Value Series appliance pull is made from zinc die cast, providing a molded metal body suited to repeated pulling on appliance fronts.
The appliance pull has a weathered nickel finish, which offers a muted metallic look that coordinates with other weathered nickel decorative hardware.
This appliance pull uses 10-24 x 1-1/4 inch screws, so the mounting relies on 10-24 machine threads for a secure installation into the door structure.
The Pro Value Series appliance pull projects 1-11/16 inches from the mounting surface, creating finger clearance for a comfortable grip on appliance doors.
The SZAPPL6-WN Pro Value Series appliance pull combines a 12 inch center to center layout, zinc die cast construction, and weathered nickel finish to address both mounting and appearance needs on appliance fronts. The defined 13-3/8 inch overall length, 1-11/16 inch projection, and 1-1/8 inch width give clear dimensional references, which support planning when you are aligning this pull with surrounding decorative hardware. For projects calling for a weathered nickel appliance pull with 10-24 x 1-1/4 inch screw mounting and a 12 inch center to center pattern, this model offers a focused option that matches those requirements.
Sold In: 1 Each
