Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Series appliance pull in weathered nickel gives an appliance or large cabinet door a consistent, finished look using an 8 inch center to center mounting layout. The zinc die cast construction forms a rigid pull, which supports stable handling when operating a door. The weathered nickel finish covers the pull with a muted metallic tone, which suits projects calling for a softer look than bright chrome. An overall 8-3/4 inch length spans more of the panel face, which helps visually balance taller or wider fronts. A 2 inch projection sets the grip out from the surface, which creates working finger clearance for a firm grasp. The 7/8 inch width provides a thicker gripping surface, which feels substantial in the hand during repeated use. The 10-24 x 1-1/4 inch screw size spec sets expectations for the mounting fastener interface.
The 8 inch center to center measurement defines the distance between mounting points, which drives drilling location for both new layouts and direct replacements. The 10-24 x 1-1/4 inch screw size specification identifies the threaded connection, which coordinates with typical appliance door preparation using that thread. The 2 inch projection positions the pull away from the panel, which supports clearance over door edges and adjacent fronts in common appliance installations. The 7/8 inch width and 8-3/4 inch length work together to create a handle footprint that suits wider stiles, which can simplify layout decisions on tall doors. The weathered nickel finish ties visually across projects using similar decorative hardware, which helps maintain finish continuity through a kitchen or utility space.
The 8 inch center to center layout of the SZAPPL2-WN appliance pull aligns well with applications that call for a longer handle span on doors. The 8-3/4 inch overall length gives proportion on full-height cabinet doors or appliance fronts, which helps the pull look sized to the panel rather than underscaled. The 2 inch projection establishes a consistent stand-off from the surface, which supports use on thicker doors where knuckle clearance can be tighter. The 7/8 inch width produces a sturdy grip area, which suits locations where hands may be wet or gloved. The weathered nickel finish coordinates with other weathered nickel decorative hardware, which helps keep a unified appearance across multiple pull and knob styles in the same project.
The clearly defined 8 inch center to center dimension on this Pro Value Series appliance pull supports jigs and templates, which streamlines drilling repeatable, straight runs on multiple doors. The fixed 10-24 x 1-1/4 inch screw size spec creates a known thread and length, which helps installers standardize prep for this pull across similar fronts. The 2 inch projection works as a set offset from the panel, which aids in planning clearances between doors and adjacent walls or cabinets. The 7/8 inch width and 8-3/4 inch length combination yields a predictable footprint, which makes it easier to align the pull relative to stile edges or panel reveals. The zinc die cast material and weathered nickel finish give a defined look and feel, which helps designers and installers present a consistent hardware specification from submittal through final installation.
This Pro Value Series appliance pull has an 8 inch center to center dimension, which controls hole spacing when drilling new doors or matching an existing layout.
The SZAPPL2-WN appliance pull measures 8-3/4 inches in overall length, which gives a longer grip span suited to tall cabinet or appliance doors.
This appliance pull is zinc die cast, which creates a solid, consistent body that feels firm in use across multiple installations.
This weathered nickel appliance pull has a 2 inch projection, which sets the handle off the surface to provide working finger clearance.
The pull has a 7/8 inch width, which provides a thicker gripping surface for opening larger or heavier doors.
This Pro Value Series appliance pull uses a 10-24 x 1-1/4 inch screw size, which defines the thread and length for the mounting connection.
The Pro Value Series appliance pull weathered nickel 8 inch center to center layout serves installers needing a defined mounting span and finish match. With zinc die cast construction, 8-3/4 inch length, 2 inch projection, and 7/8 inch width, this SZAPPL2-WN appliance pull supports consistent grip and visual balance across appliance and tall cabinet doors. Using the 10-24 x 1-1/4 inch screw size specification, it integrates into projects planned around that thread and length. Order this appliance pull when an 8 inch center to center, weathered nickel option fits the hardware schedule.
Sold In: 1 Each
