Pro Value Series appliance pull SZAPPL5-ORB is a zinc die cast appliance pull designed for use where a 12 inch center to center mounting layout is needed, helping align with existing bore patterns on appliance or cabinet panels. The pull has a total 13 inch length, so it spans a wider area on the face of the panel, giving the installer predictable coverage around the mounting holes. An oil rubbed bronze finish defines the visible surface, tying the pull into dark-toned hinge, knob, or pull schemes on adjacent doors and drawers. The 2-3/8 inch projection sets how far the pull stands off the panel, creating consistent finger clearance for users. A 1 inch width establishes the gripping surface, providing a defined edge for opening heavier appliance fronts or large pantry doors in day-to-day use.
The 12 inch center to center measurement on this oil rubbed bronze appliance pull defines exactly where the two mounting points land along the door or panel, which simplifies layout when aligning with appliance manufacturer handle zones. The specified 10-24 x 1-1/4 inch screw size describes the threaded fastener interface, guiding the drilling diameter and thread engagement needs on the mounting surface. With a 2-3/8 inch projection, the pull positions the gripping area away from the panel face, which influences how fingers clear raised door panels or applied moldings. The 1 inch width sets the pull footprint on the surface, which matters when routing, drilling, or fabricating custom appliance panels to visually center the hardware.
This 12 inch center to center appliance pull from the Pro Value Series works where a larger handle is needed on appliance fronts or tall cabinet doors. The appliance pull classification ties it to applications such as refrigerator or panel-ready appliance doors, where a longer grip is beneficial. The 13 inch overall length extends slightly beyond the mounting points, which helps the pull visually anchor wide doors without overwhelming narrower stiles. With an oil rubbed bronze finish, the pull integrates into projects featuring dark hinges or matching pulls on neighboring cabinets, giving the installer a coordinated finish choice. The 1 inch width establishes a defined bar profile, which is useful on heavy-use doors that demand a substantial handhold. These dimensions combine to give the installer clear expectations about how this pull will look and function on taller or heavier-front doors.
The specified 12 inch center to center spacing on the SZAPPL5-ORB appliance pull allows consistent hole placements across multiple panels, reducing layout variation from one installation to the next. Using the defined 10-24 x 1-1/4 inch screw size provides a known thread and length, which streamlines drilling choices and helps achieve repeatable clamping of the zinc die cast body against the panel. The 2-3/8 inch projection controls how far the gripping area extends into the room, influencing both user comfort and clearance when doors swing past adjacent cabinetry. Because the pull is zinc die cast, it presents a uniform metal body around the mounting posts, which supports even load distribution when the door is pulled from different angles. The oil rubbed bronze finish offers a consistent surface tone, which simplifies matching multiple pulls on a run of appliance and cabinet doors for a uniform appearance.
The 12 inch center to center dimension on this appliance pull defines the distance between the two mounting holes, guiding drilling and alignment on appliance or cabinet panels.
The Pro Value Series appliance pull SZAPPL5-ORB has a 13 inch overall length, so it extends slightly past the mounting holes to visually anchor wider doors or appliance fronts.
The SZAPPL5-ORB appliance pull is zinc die cast, providing a solid metal body that responds predictably when tightened against the mounting surface during installation.
This oil rubbed bronze appliance pull has a 2-3/8 inch projection, setting how far it stands off the panel and affecting finger clearance for everyday use.
The appliance pull has a 1 inch width, defining the bar profile and providing a consistent gripping surface on appliance doors or large cabinet fronts.
This appliance pull uses 10-24 x 1-1/4 inch screws, setting the thread type and length needed to fasten the pull securely through the panel.
The Pro Value Series appliance pull SZAPPL5-ORB combines a 12 inch center to center layout, 13 inch overall length, and 2-3/8 inch projection to support consistent appliance or cabinet door handle placement. The zinc die cast construction and oil rubbed bronze finish define both the structure and appearance, aligning with projects that specify dark decorative hardware. With a 1 inch width and a known 10-24 x 1-1/4 inch screw interface, this pull offers clear mounting and layout dimensions for installers planning appliance fronts, tall pantry doors, or other large cabinet applications.
Sold In: 1 Each
