Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Series appliance pull is a zinc die cast handle designed for appliance applications where a 12 inch center to center layout is required, so doors align with standard drilling patterns on many appliance panels and tall cabinet fronts. The weathered nickel finish provides a muted metallic look that suits decorative hardware and moldings projects where a softer metal tone is preferred over bright finishes. A 12-3/4 inch overall length spreads the grip area across wider door faces, which helps distribute pulling force on large or heavy doors. The 2-1/2 inch projection creates hand clearance from the door surface, supporting a full hand grip when operating appliances with heavier action. A 1 inch width gives the pull a substantial feel in the hand while keeping a slim profile on the face of the panel. The 10-24 x 1-1/4 inch screw size matches common machine thread patterns used in appliance style mounting.
This zinc die cast appliance pull uses 12 inch center to center mounting, so installers can set two clean, straight holes for consistent alignment along door edges or centerlines. The 10-24 x 1-1/4 inch screw size matches standard machine screw threading, which supports secure fastening into prepared inserts or through-bolted appliance panels. With a 2-1/2 inch projection, this pull stands off the surface enough to clear raised panel profiles and decorative moldings around the door. The 1 inch width and 12-3/4 inch length create a long, stable footprint on the face, which helps spread load when users pull on the handle. The weathered nickel finish allows this pull to coordinate visually with other weathered nickel handles and pulls identified in the decorative hardware and moldings category.
This appliance pull is specified in the Appliance Pulls collection, so it is suited to appliance doors and similar large fronts where a longer handle is appropriate. The 12 inch center to center mounting works well on tall doors that benefit from two widely spaced fastener points, such as built-in appliance panels or pantry-style cabinet doors. Its 12-3/4 inch overall length creates a proportional look on oversized faces, helping the hardware match the scale of the panel. The 2-1/2 inch projection gives room for a firm grasp on doors with deeper reveals or profiled edges, which supports smooth operation in tight installations. The weathered nickel finish allows the pull to blend into projects that use weathered nickel decorative hardware and moldings, creating a consistent appearance across doors and drawers.
The defined 12 inch center to center spacing allows fabricators to repeat the same drilling pattern across multiple units, which reduces layout variation from one door to the next. The 1 inch width sets a clear visual reference along stiles or centerlines, helping installers align the pull square to the door edge. The 12-3/4 inch length helps visually balance the hardware on tall or wide faces, which can support a more even look in rows of aligned doors. Zinc die cast construction provides a uniform shape and weight across pieces, which supports consistent feel when users operate adjacent doors. The weathered nickel finish ties multiple pulls together visually, which can reduce the appearance of variation across a full run of cabinetry or appliance fronts. The 2-1/2 inch projection keeps hand contact in a straight line away from the door, supporting repeatable grip and pull motion for frequent use.
The Pro Value Series appliance pull has a 12 inch center to center dimension, which sets the hole spacing for drilling and helps maintain consistent alignment across doors.
The appliance pull measures 12-3/4 inches in overall length, giving it the reach needed to look proportional on appliance doors and tall cabinet fronts.
This weathered nickel appliance pull projects 2-1/2 inches from the mounting surface, providing hand and knuckle clearance for comfortable operation.
The SZAPPL4-WN appliance pull is made from zinc die cast material, giving it a solid, uniform body suited to decorative hardware and moldings applications.
This Pro Value Series appliance pull has a weathered nickel finish, providing a softened metallic appearance that coordinates with other weathered nickel hardware.
The appliance pull uses 10-24 x 1-1/4 inch screws, matching common machine thread patterns for appliance style mounting into panels or inserts.
The Pro Value Series appliance pull in weathered nickel combines a 12 inch center to center layout with a 12-3/4 inch overall length, fitting appliance doors and tall fronts that need longer hardware. Zinc die cast construction and a 1 inch wide profile deliver a solid, consistent grip across multiple doors. The 2-1/2 inch projection supports comfortable hand clearance in everyday use. For projects built around weathered nickel decorative hardware and moldings, this SZAPPL4-WN appliance pull provides a coordinated look with defined mounting dimensions ready for layout.
Sold In: 1 Each
