
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Hettich Quadro V6 undermount slide gives a 21 inch soft-close, full extension action that lets drawers travel completely out while slowing the last part of the stroke, which helps drawers close gently in daily use. This right hand slide uses ball bearing technology, so the drawer runs on rolling elements that support consistent movement under load. The integrated damping system Silent System is built into the slide, which controls speed at the end of travel and helps avoid slamming in kitchens, baths, and shop cabinets. This slide is designed as an undermount drawer slide, so it supports the drawer from below and keeps the sides clear for clean aesthetics and hardware mounting.
This soft close full extension drawer slide supports drawers with 1/2 inch (13 mm) or 5/8 inch (16 mm) side thickness, so standard drawer box materials in those sizes can be used without changing construction methods. The runner is suitable for face frame or frameless applications, so the same undermount slide model works in different cabinet construction styles. Slide on installation with front fixing clips sets the primary engagement at the front, which simplifies how the drawer box connects to the undermount slide during fitting. Tool-less height adjustment and side adjustment at the clips concentrate alignment at the front, which streamlines setup when dialing in gaps and reveals on multi-drawer stacks.
This Hettich 9304281 right undermount slide has a 21 inch length, which suits drawer depths built around that nominal slide size in kitchens, baths, offices, and shop cabinetry. Load capacity up to 90 lbs dynamic and 100 lbs static, as per ANSI/BHMA 156.9 grade 1 specification on a 21 inch length slide, means the runner is rated for substantial everyday use where drawers carry cookware, tools, or hardware. The slide meets or exceeds ANSI/BHMA 156.9 grade 1 requirements, so it follows a recognized performance standard for drawer slide durability and operation. Galvanized steel construction is suitable for rooms exposed to moisture, which supports use in areas like bathrooms or utility spaces where humidity is present. The design is described for narrow applications, which helps when working in tighter cabinet bays where side clearances and drawer widths are constrained.
This undermount drawer slide uses slide on installation with front fixing clips, which provides a defined interface between the runner and the drawer for repeatable setup across multiple units. Tool-less height adjustment built into the front fixing clips allows small vertical tweaks at the drawer front after mounting, which helps line up horizontal reveals without removing the drawer. Side adjustment up to plus or minus 2 mm with the 2D front fixing clips offers controlled lateral movement, which is useful for creating consistent side gaps between fronts in banks of drawers. The integrated damping system Silent System is part of the runner, which keeps the closing behavior consistent from cabinet to cabinet without separate devices. For face frame or frameless applications, the same Quadro V6 undermount layout can be used across different cabinet lines, which simplifies planning when a project mixes both construction styles.
The Hettich 9304281 is a Quadro V6 21 inch soft-close full extension undermount drawer slide, so it supports the drawer from below while providing complete travel and controlled closing.
This Quadro V6 undermount slide has a load capacity up to 90 lbs dynamic and 100 lbs static on the 21 inch length, as per ANSI/BHMA 156.9 grade 1, which supports heavier everyday drawer loads.
This drawer slide is designed for drawers with 1/2 inch (13 mm) or 5/8 inch (16 mm) side thickness, so common drawer box material sizes fit the runner geometry.
This undermount slide is suitable for face frame or frameless applications, so it can be used across different cabinet construction styles in the same project.
The tool-less height adjustment on the front fixing clips lets you shift the drawer front up or down after mounting, which helps align reveals without disassembling the drawer.
The integrated Silent System damping slows the final closing travel of the drawer, which reduces slamming and helps protect the drawer box and cabinet over time.
This ANSI/BHMA 156.9 grade 1 drawer slide combines 21 inch full extension travel with soft-close damping, which suits everyday-use drawers that need smooth access and controlled closing. Compatibility with 1/2 inch and 5/8 inch drawer side thickness supports common drawer box builds across residential, commercial, and shop projects. The undermount design with slide on installation, tool-less height adjustment, and plus or minus 2 mm side adjustment through the 2D front fixing clips offers practical alignment control, which helps deliver consistent reveals across a bank of drawers using this Hettich Quadro V6 undermount slide.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | HTQUADRO2D-21L Mfr# 9304280 | Hettich Quadro V6 21" Soft-Close Full Extension Undermount Drawer Slides, Ball Bearing Left hand Zinc - 9304280 |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Set | HTQUADRO1D-1/2CL Mfr# 9306533 | Quadro V6 1D Front Fixing Clip for 1/2" Material | ||||
Sold in: 1 Set | HTQUADRO1D-5/8CL Mfr# 9306534 | Quadro V6 1D Front Fixing Clip for 5/8" Material | ||||
Sold in: 1 Set | HTQUADRO2D-1/2CL Mfr# 9306535 | Quadro V6 2D Front Fixing Clip for 1/2" Material | ||||
Sold in: 1 Set | HTQUADRO2D-5/8CL Mfr# 9306536 | Quadro V6 2D Front Fixing Clip for 5/8" Material | ||||
Sold in: 1 Set | HTQUADRO1D-1/2CLT Mfr# 9306537 | Quadro V6 1D Top Mount Front Fixing Clip for 1/2" Material | ||||
Sold in: 1 Set | HTQUADRO2D-1/2CLT Mfr# 9306539 | Quadro V6 2D Top Mount Front Fixing Clip for 1/2" Material | ||||
Sold in: 1 Set | HTQUADRO2D-5/8CLT Mfr# 930654002 | Quadro V6 2D Top Mount Front Fixing Clip for 5/8" Material |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | HTQUADRO2D-RB Mfr# 9308864 | Metal Rear Mount Bracket Set for Quadro V6, Screw-On | ||||
Sold in: 1 Each | HT9308854 Mfr# 9308854 | QUADRO 2D PLASTIC BRKT LH SCREW IN C-274, 9308854 | ||||
Sold in: 1 Each | HT9308855 Mfr# 9308855 | QV6 2D REAR BRKT SCREW R 100/BX, 9308855 | ||||
Sold in: 1 Each | HT9308856 Mfr# 9308856 | QV6 2D REAR BRKT L 100/BX, 9308856 | ||||
Sold in: 1 Each | HT9308857 Mfr# 9308857 | QV6 2D REAR BRKT R 100/BX, 9308857 |