Fulterer 22" Full Extension Soft-Close Ball Bearing Drawer Slides, Unhanded Side Mount Zinc - 75087

Fulterer 22 Inch Soft Close Drawer Slides

Fulterer 22 inch soft close drawer slides use a full extension ball bearing design, so the drawer can travel its full length while running on ball bearings for smooth, controlled motion in everyday use. The soft-close function in these slides slows the drawer travel at the end of stroke, which helps drawers close gently in cabinet installations. Their side mounting configuration positions the slide on the cabinet side, which supports typical drawer box construction in many shops. The slides are non-handed, meaning the same part works on either left or right side, which helps simplify inventory and installation steps. A soft-close trigger disconnect is built into this model, allowing the drawer to be released from the slide through a trigger mechanism, which supports removal for adjustments or service. These slides use a 32 mm hole pattern that matches systems-based cabinet layouts, helping align drilling operations on production or shop-built cabinets.

Key Functional Details For Drawer Projects

• The full extension design lets the drawer open to its nominal 22 inch travel, giving clear access to stored items and allowing installers to align fronts and hardware using the full slide stroke.
• The soft-close feature manages the final drawer travel, which helps reduce slamming in kitchens, baths, or shop cabinets and can support a more controlled feel during daily operation.
• The ball bearing construction carries the drawer on rolling elements, which supports smoother movement under load compared to simple friction slides in many cabinet builds.
• The non-handed configuration uses a single part number for either side of the drawer, which can streamline ordering, stocking, and layout on both left and right hand installations in the shop.
• The trigger disconnect allows the slide to release the drawer through its trigger, which can speed up drawer removal for fitting, finishing, or installing fronts in a production sequence.
• The 32 mm hole pattern matches system drilling patterns, which helps align slides with standard cabinet rows and can reduce layout time on frameless or system-based casework.
• Side mounting positions the slide on the drawer and cabinet sides, supporting common drawer box designs where clearances are planned for side mount ball bearing slides.

Installation And 32 Mm Pattern Alignment

These drawer slides use side mounting, so the installer aligns each member along the drawer and cabinet sides, which fits standard side-mount clearance planning in many cabinet lines. The 32 mm hole pattern on the slide matches system-drilled cabinet rows, which helps position the hardware relative to shelf pins and hinge lines during layout. A trigger disconnect feature lets the drawer box separate from the slide, which can make it easier to work with drawer boxes and face fronts off the cabinet. Rear mounting brackets are available for face frame applications, meaning the slide can be supported at the cabinet rear in face frame cases, helping transfer load when a frame front is present.

Using Fulterer 75087 Slides In Cabinet Work

Where These Soft Close Slides Are Applied

This Fulterer USA, Inc. model 75087 is a side mount drawer slide for projects that call for soft-close action and full extension in a 22 inch nominal length. The product sits in the side mount drawer slides class, so it fits applications that are already laid out for side-mounted ball bearing slides rather than under-mount systems. Its soft-close function suits drawer locations where controlled closing is valued, such as residential cabinets, workroom storage, or shop fixtures using this hardware type. Because the slides are unhanded, a shop can deploy the same SKU on both sides of the drawer, helping keep runs of cabinets consistent across left and right drawers. The 32 mm hole pattern supports cabinets built on that drilling system, tying the slide position to pre-planned hole rows for repeatable assembly.

Details That Support Repeatable Drawer Results

The full extension ball bearing design in these slides lets the drawer travel out to its working length, which can help during installation when aligning drawer fronts, hardware, and reveals using the entire stroke. Soft-close action manages the last part of the closing movement, which can support drawer alignment over time by reducing abrupt impacts at the cabinet front. With the trigger disconnect, the drawer can be released from the slide, letting installers pull the drawer box out for separate sanding, finishing, or fitting operations while the cabinet carcass stays on the bench or in the field. Rear mounting brackets available for face frame applications give another support point at the cabinet rear, which is useful when the cabinet has a face frame front and needs rear support to keep the slide in position. In combination, the side mount format, ball bearing movement, and 32 mm hole pattern allow the Fulterer 75087 slide to slot into system-based cabinet production where predictable mounting locations and repeatable drawer action are central to the workflow.

Common Questions About Fulterer 22 Inch Slides

Select Fulterer 22 Inch Slides For System Builds

The Fulterer 22 inch soft close drawer slides combine full extension ball bearing travel, side mounting, and a 32 mm hole pattern, which suits system-based cabinet shops planning around side mount hardware. Their non-handed design and trigger disconnect support straightforward drawer handling through building, finishing, and final install. Rear mounting brackets available for face frame applications give flexibility when working across both frameless and face frame carcasses. Selecting the Fulterer 75087 drawer slide brings these elements together in a single model for soft-close, full-extension drawers.