Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Pro Value Series PRO 3.0 is a 10 inch full-extension side-mount ball bearing drawer slide, rated 100 lb per pair, finished in zinc, and built for frameless or face-frame cabinet drawers where a shorter slide length is the right fit. Standard motion means no self-close or soft-close mechanism — the drawer travels on the bearings and stays where it is left.
A 10 inch slide fits the shallow drawers that appear throughout a cabinet project: spice pull-outs, small vanity drawers, utility trays in a bathroom base cabinet, and narrow upper-cabinet drawers where a longer slide simply will not fit the interior depth. Full extension matters here because the drawer box is short — without it, the last few inches of a shallow drawer stay buried and hard to reach. At 100 lb per pair, the rating handles everything from a bathroom drawer loaded with toiletries to a small shop tray carrying light tools.
The zinc finish on the PRO 3.0 is the segment standard for a reason: it protects the cold-rolled steel members through years of daily cycling in a dry indoor environment without adding visible hardware bulk. The slides sit alongside the drawer box and are largely out of sight when the drawer is closed, so the finish is functional rather than decorative. This is an indoor slide — not intended for exterior, high-humidity, or washdown environments.
Cabinet shops and contractors running mixed-depth drawer configurations reach for the 10 inch length when shorter base cabinets, bathroom vanities, or upper cabinet drawer banks call for a dedicated slide that matches the available interior depth. Designers specifying a bank of small accent drawers will find the non-handed, standard-motion format straightforward to spec and install. Homeowners replacing worn slides on a vintage vanity or a small dresser will find the 100 lb rating and full-extension action more than adequate for the job. Sold as a pair — one slide per side per drawer.
Slide length and travel are two different measurements. The 10 inch figure is the closed length of the slide. Full extension means the drawer member travels approximately that full length, bringing the whole drawer out to the cabinet face — but the slide length must match the drawer depth and cabinet interior depth, not the desired travel distance.
Side-mount ball bearing slides in this class require 1/2 inch of clearance per side between the drawer box and the cabinet interior. Build the drawer box 1 inch narrower than the opening to account for both slides.
Yes, with rear support. Face-frame cabinets set the cabinet side back from the frame opening, so the slide's back end needs a rear mounting bracket. Brackets for face-frame installations are sold separately and are series-specific.
This PRO 3.0 is a standard-motion slide with no closing mechanism. For damped soft-close action on a side-mount installation, look for a dedicated soft-close ball bearing slide in the matching length.
No. The non-handed design means both slides in the pair are identical — either fits the left or right side of the drawer.
When the cabinet depth calls for a 10 inch slide, the PRO 3.0 delivers full extension, a 100 lb rating, and zinc durability without overengineering a straightforward installation — one pair, two identical slides, ready to go.
Sold In: 10 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  DSPRO3.0-RB-DWL Mfr# 0684075079961 168 | PRO Value DSPRO 3.0 Rear Mounting Bracket, 0684075079961 168 |
