Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Pro Value PRO 3.0 is a 14 inch full-extension side-mount ball bearing drawer slide, rated 100 lb per pair, finished in bright zinc. It is the right slide when you need a dependable, non-handed pair for shallow-drawer runs in kitchen, bath, or utility casework and want consistent availability at a value price point.
A 14 inch slide is the natural fit for spice pull-outs, bathroom vanity drawers, narrow utility cabinets, and any case where the interior depth runs under 15 inches. Full extension at this length means the drawer clears the cabinet opening completely — the back of the box is visible and reachable without stretching or guessing. Standard motion means there is no spring or damper working against a push-to-open retrofit or a freely positioned tray.
Cold-rolled steel members carry a bright zinc plating that protects against everyday indoor moisture and wear. Zinc is the functional standard for side-mount ball bearing slides — it is not a decorative finish, and it is not rated for exterior or wet-area applications. The slide sits beside the open drawer box, visible from the side, so the clean zinc appearance blends with standard cabinet interiors without drawing attention.
Cabinet shops running production kitchens and baths benefit most from a slide that needs no left/right inventory split and arrives ready to install on either side of any box. The 14 inch length suits spice drawer modules, narrow bathroom vanities, small utility pull-outs, and any shallow-case drawer where a longer slide would overhang the cabinet's interior depth. The 100 lb per pair rating handles everyday residential loads, and the standard-motion design is easy to pair with handle-less fronts using a separate push-to-open mechanism. Build the drawer box 1 inch narrower than the cabinet opening to provide the required 1/2 inch side clearance per slide. In face-frame cabinets, add the appropriate rear mounting brackets — these are sold separately and are series-specific.
No — 14 inches is the closed length of the slide. Because this is a full-extension design, the drawer member travels approximately the full slide length, bringing the whole drawer box out to the cabinet face. Slide length and travel are two separate facts.
No. The PRO 3.0 is a standard-motion slide — there is no damper, no self-closing spring, and no detent. The drawer stays wherever you leave it. If soft-close is needed, look for a soft-close ball bearing slide in the same length.
No. The design is non-handed, so both slides in the pair are identical. Order one pair per drawer.
Yes, with the right rear support. Face-frame cabinets set the cabinet side back from the front frame, so the slide needs rear mounting brackets to carry its back end. Those brackets are sold separately and must match this series.
Build the box 1 inch narrower than the cabinet opening — that leaves the required 1/2 inch side clearance for each slide.
The Pro Value PRO 3.0 at 14 inches gives production cabinet work exactly what shallow drawers need: a full-extension, 100 lb rated, non-handed pair in bright zinc, ready to drop into the line without left/right sorting or extra lead time.
Sold In: 10 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  DSPRO3.0-RB-DWL Mfr# 0684075079961 168 | PRO Value DSPRO 3.0 Rear Mounting Bracket, 0684075079961 168 |
