Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Pro Value PRO 3.0 is a 12 inch full-extension side-mount ball bearing drawer slide rated 100 lb per pair, finished in bright zinc, and designed for the volume demands of production cabinet shops and residential installs alike. It is a standard-motion slide: no self-close, no soft-close, no detent — the drawer rides the bearings and stays where it is left.
A 12 inch slide is the right call for shallow base-cabinet drawers, spice pull-outs, and narrow drawer stacks where the cabinet interior depth tops out around 12 inches. At full extension, the entire drawer clears the cabinet face, giving access all the way to the back of the box — a meaningful advantage over 3/4-extension alternatives in tight spaces where reaching in is inconvenient. The standard-motion design suits any application where a closing mechanism would interfere, including drawers built for a separate push-to-open retrofit.
The slide members are cold-formed steel with a bright zinc electroplate — the workhorse finish in this segment. Zinc protects the steel through years of indoor service without adding visual weight in the cabinet. It is a functional finish, most of it hidden beside the open drawer box, so it does not compete with the face frame or front finish.
Cabinet shops running shallow drawer stacks and contractors sourcing for spec kitchens will find the PRO 3.0 a practical choice: full extension and a 100 lb pair rating at a value price point, non-handed for fast installation, and available in the quantities production work demands. Homeowners retrofitting a vanity or utility drawer get the same slide without paying for features they do not need. Build the drawer box 1 inch narrower than the cabinet opening to leave 1/2 inch of side clearance per slide. In face-frame cabinets, add the appropriate rear mounting brackets — these are sold separately and series-specific.
No — 12 inches is the closed length of the slide. Because this is a full-extension slide, the drawer travels approximately the full slide length and the entire drawer clears the cabinet face. Slide length and travel are two separate specs; on a 3/4-extension slide the same 12 inch measurement would mean the drawer only opens about 9 inches.
Neither. The PRO 3.0 is a standard-motion slide — no damper, no spring, no detent. The drawer stays wherever it is left. If you need soft-close in this length, look for the soft-close version of the Pro Value line.
No. The design is non-handed, so both slides in the pair are identical. One order covers both sides of the drawer without any left/right matching.
Yes, but you will need rear mounting brackets to support the back end of the slide where the cabinet side is set back from the face frame. The brackets are sold separately and must match this series — do not mix with rear hardware from other slide lines.
This listing is sold as a pair, which is the complete set for one drawer.
The PRO 3.0 in 12 inch zinc gives you full-extension access and a 100 lb pair rating in the most common shallow-drawer length — no more than what the work requires, nothing left out that matters.
Sold In: 10 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  DSPRO3.0-RB-DWL Mfr# 0684075079961 168 | PRO Value DSPRO 3.0 Rear Mounting Bracket, 0684075079961 168 |
