Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Pro Value PRO 3.0 is a 20 inch full-extension side-mount ball bearing drawer slide rated 100 lb per pair, finished in zinc, and designed to move through a cabinet shop without friction — simple specs, honest capacity, and non-handed design that cuts sorting time on the bench.
A 20 inch slide length suits mid-depth cabinet runs: base cabinets with 21 to 22 inch interior depths, bathroom vanities, and utility cabinetry where the drawer box is built to match. Full extension means nothing gets lost at the back — the full drawer comes out to the opening so the contents are accessible front to back. The 100 lb per pair rating covers everyday kitchen and utility loads comfortably, from pots-and-pans drawers to tool storage in a shop cabinet.
Because this is a standard-motion slide, it pairs naturally with separate push-to-open hardware or with installations where a damper or spring mechanism is not needed. It is an indoor slide — the zinc finish is suited to dry cabinet interiors, not wet or exterior environments.
The PRO 3.0 is built from cold-rolled steel with a bright zinc electroplate finish. Zinc is the workhorse finish for side-mount ball bearing slides: it resists the low-level humidity of a typical interior cabinet space and keeps the slide moving cleanly over years of cycling. The finish is functional, not decorative — the slide sits beside the drawer box and is mostly out of view once the drawer is closed.
Cabinet shops running production kitchens reach for the PRO 3.0 when they need a reliable, volume-friendly full-extension slide that does not require left/right sorting or special hardware to install. The non-handed design speeds up staging, and the standard-motion specification keeps things straightforward for installers who are not specifying soft-close on every run. Contractors retrofitting existing cabinetry and homeowners replacing worn slides in a 20 inch application will find the specs and clearance requirements match the standard side-mount format they are already working with.
The slide is 20 inches long (its closed, nominal length). Full extension means the drawer member travels approximately that full length, bringing the entire drawer out to the cabinet face — but slide length and travel are two separate facts. Match the slide length to your cabinet's interior depth, not to a desired opening distance.
This listing is for a quantity pack; confirm the pack count in the product spec block above. One drawer requires two slides — one per side.
Standard side-mount ball bearing slides in this class require 1/2 inch of clearance per side. Build the drawer box 1 inch narrower than the cabinet opening to leave that space on each side. Confirm the exact tolerance for the PRO 3.0 in the spec block.
Side-mount slides can be used in face-frame cabinets, but the slide's back end needs support. Rear mounting brackets are required for face-frame installation and are sold separately; confirm compatibility with the PRO 3.0 series before ordering.
Correct. Standard motion means the slide has no self-close spring, no soft-close damper, and no hold-in detent. The drawer stays wherever it is left, which makes this slide a clean starting point for applications using separate push-to-open hardware or for installs where no closing mechanism is wanted.
The PRO 3.0 in 20 inch zinc delivers the combination that production work depends on: honest full-extension travel, a 100 lb per pair rating, and a non-handed design that keeps installation moving — no guessing, no sorting, no surprises.
Sold In: 10 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  DSPRO3.0-RB-DWL Mfr# 0684075079961 168 | PRO Value DSPRO 3.0 Rear Mounting Bracket, 0684075079961 168 |
