Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Pro Value Series PRO 3.0 is an 18 inch full-extension side-mount ball bearing drawer slide rated 100 lb per pair, finished in zinc, and designed for the volume demands of production cabinetry shops and commercial installs. Standard-motion design means no damper and no spring — the drawer rides on steel ball bearings and stays wherever it is left.
An 18 inch full-extension slide suits drawers in base cabinets built to standard 21 inch depth, where the drawer box runs 18 inches front to back. Full extension means the entire drawer clears the opening — pots-and-pans drawers, utensil drawers, shop drawers, and any box where reaching the back matters. The standard-motion design is also the right call when these slides are going into a push-to-open application, since a spring or damper mechanism would work against the ejector. Mount one slide per side with 1/2 inch of side clearance each, and the drawer moves on ball bearings from the first pull.
The slide is cold-formed steel throughout, with a bright zinc finish that protects against corrosion in dry indoor environments. Zinc is the working standard for side-mount ball bearing slides — it holds up in kitchen, office, and shop service without adding visual weight to the cabinet interior. This is a side-mounted slide, so it sits beside the open drawer box; the finish choice keeps the hardware honest rather than decorative.
The PRO 3.0 is a volume line. Cabinet shops running high drawer counts benefit from the non-handed design, which eliminates the step of sorting lefts from rights at the bench. The 100 lb per pair rating covers standard residential and light commercial drawer loads without overspecifying. For frameless cabinets, the 32mm hole pattern drops straight onto a line-bored panel. In face-frame cabinets, rear mounting brackets are required to support the back of the slide — those brackets are sold separately and are series-specific. Sold as a pair, one pair per drawer.
Full extension. The intermediate member lets the drawer travel its full length, bringing the entire box out to the cabinet face. The rear of the drawer is reachable at full open.
No. This is a standard-motion slide with no damper and no spring. The drawer stays wherever it is left. If you need soft-close, look at the FR 5001 soft-close models in the same length.
Plan for 1/2 inch of clearance per side, so the drawer box is built 1 inch narrower than the cabinet opening.
No. The PRO 3.0 is non-handed — both slides in the pair are identical and fit either side of the drawer.
Yes, with the correct rear mounting brackets. Face-frame construction sets the cabinet side back from the opening, so the back of the slide needs rear support. Add the matching rear brackets, sold separately, before installing in face-frame work.
When the spec is straightforward — 18 inch, full extension, 100 lb, zinc — the PRO 3.0 delivers it consistently across every drawer on the project without complexity or added cost.
Sold In: 10 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  DSPRO3.0-RB-DWL Mfr# 0684075079961 168 | PRO Value DSPRO 3.0 Rear Mounting Bracket, 0684075079961 168 |
