Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Pro Value PRO 3.0 is a 26 inch full-extension side-mount ball bearing drawer slide, rated 100 lb per pair, finished in zinc, and designed to move through a cabinet shop without slowing it down. It is a standard-motion slide: no soft-close, no spring, no detent — just smooth, reliable travel on steel ball bearings with a clean zinc finish that holds up through years of indoor service.
A 26 inch slide is the right length for deeper base cabinets and full-depth kitchen drawers where a shorter slide would leave travel on the table. Full extension means the entire drawer box comes out past the cabinet face — the back corner of a pots-and-pans drawer or the rear of a utility pullout is reachable without reaching blind into the cabinet. At the 100 lb per pair rating, these slides are properly sized for loaded kitchen drawers, deep pantry pullouts, and shop or garage storage drawers that carry real weight. Standard motion keeps the installation straightforward and makes these slides a natural fit for any handle-less front application that relies on a push-to-open mechanism added separately.
The slide members are cold-formed steel, and the zinc finish is electroplated over the steel for indoor corrosion resistance. Zinc is the working standard for side-mount ball bearing slides — a functional finish that handles shop humidity and everyday cabinet use without special treatment. It is not a decorative or stainless finish, and these slides are for dry, indoor applications. The finish on the PRO 3.0 is bright zinc; the slide sits beside the open drawer box and is largely out of sight in service.
Cabinet shops running production schedules reach for the PRO 3.0 when they need a dependable full-extension slide at a value price point — in stock, non-handed, and ready to install without special hardware. The 26 inch length is the go-to for standard 24 inch deep base cabinets where a 22 inch slide would come up short. Designers and contractors specifying residential kitchens and built-ins find the 100 lb, full-extension combination covers the broad middle of drawer applications without oversizing for the job. Homeowners doing a full kitchen renovation and sourcing hardware in volume get the same slide the shops use, at wholesale pricing, without compromising on extension or load capacity.
No — 26 inches is the closed length of the slide. Because this is a full-extension slide, the drawer travels approximately its full slide length, bringing the entire drawer box out past the cabinet face. Slide length and drawer travel are separate specs.
No. This is a standard-motion slide with no closing mechanism. The drawer stays wherever it is left. If soft-close is needed, look at a slide with an integrated damper module.
No. The PRO 3.0 is non-handed — both slides in the pair are identical and fit either side of the drawer. Order one pair per drawer.
Side-mount ball bearing slides in this class require 1/2 inch of side clearance per slide, so build the drawer box 1 inch narrower than the cabinet opening. Confirm the clearance specification for the PRO 3.0 against the series data before sizing the box.
Side-mount slides in face-frame cabinets need support at the rear because the cabinet side is set back from the frame. Rear mounting brackets are required for face-frame installations and are sold separately; confirm bracket compatibility with the PRO 3.0 series before ordering.
The Pro Value PRO 3.0 in 26 inch zinc delivers honest full extension, a 100 lb per pair rating, and a non-handed design that keeps installation moving — exactly what volume cabinet work demands.
Sold In: 10 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  DSPRO3.0-RB-DWL Mfr# 0684075079961 168 | PRO Value DSPRO 3.0 Rear Mounting Bracket, 0684075079961 168 |
