Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Pro Value PRO 3.0 is a 28 inch full-extension side-mount ball bearing drawer slide rated 100 lb per pair, finished in zinc, and built for the longer drawer runs found in deep base cabinets, pantry pulls, and utility storage. Standard-motion design means no closing mechanism — the drawer travels freely on steel ball bearings and stays wherever it is left.
Most kitchen base cabinets run 24 inches deep or more, and the drawers inside them — especially pots-and-pans drawers and deep pantry pull-outs — need a slide long enough to match. At 28 inches, this slide fits those deeper runs without improvising. Full extension brings the back wall of the drawer all the way out to the cabinet opening, so nothing gets buried at the rear. Because this is a standard-motion slide, there is no self-close ramp or soft-close damper affecting the pull — the drawer moves freely and stays put, which makes it straightforward to retrofit around a pull-out organizer or a custom insert that controls its own position.
The PRO 3.0 is built from steel with a bright zinc finish — the workhorse combination in this segment. Zinc plating protects the steel members through years of indoor cabinet service. This is not a decorative finish; it is a practical one, appropriate for hardware that sits beside the drawer box and is mostly hidden in use. For installations where the slide would be visible — an open shelf pull-out or an industrial work bench — a black finish variant may suit better aesthetically, but the zinc version is the standard choice for enclosed cabinet work.
Cabinet shops running production on deep base cabinets will find the 28 inch length addresses the drawer depth that 22 and 24 inch slides cannot. Contractors retrofitting older kitchens with deeper storage pull-outs, and homeowners upgrading a pantry cabinet to full-extension access, both benefit from this length. The 100 lb per pair rating covers the realistic load of a fully stocked pantry drawer or a pots-and-pans pull-out. The non-handed design simplifies ordering — one quantity covers both sides of every drawer in the run without tracking left and right counts separately.
A standard-motion slide has no closing mechanism, so it does not pull the drawer shut — but the ball bearings provide enough rolling resistance that a level drawer stays in place under normal use. If the cabinet is noticeably out of level, a self-close or hold-in detent variant is the better choice.
Side-mount ball bearing slides in this class require 1/2 inch of clearance per side. Build the drawer box 1 inch narrower than the cabinet opening to leave the correct gap for each slide.
Side-mount slides need support at the rear of the cabinet. In a face-frame installation, add the appropriate rear mounting brackets — sold separately — to carry the back end of the slide. Frameless cabinets mount directly to the side panel.
Confirm the sold-as unit at checkout; the quantity notation in the product name indicates the pack count. One drawer requires one pair of slides.
No — the slide's closed length needs to fit inside the cabinet. Match the slide length to the available interior depth, leaving a small clearance for the slide to close completely.
When the cabinet is deep and the drawer needs to come all the way out, the 28 inch PRO 3.0 covers the run that shorter standard slides leave unfinished — with a 100 lb rating that holds up to the loads those drawers typically carry.
Sold In: 10 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  DSPRO3.0-RB-DWL Mfr# 0684075079961 168 | PRO Value DSPRO 3.0 Rear Mounting Bracket, 0684075079961 168 |
