Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This All American Wood Register vent is an unfinished solid red oak air vent sized to cover a 4 by 12 inch opening, with a 5-1/2 by 13-3/16 inch face on the finished surface.
The number that determines fit is the hole size: 4 by 12 inches. That is the existing opening the vent covers, and it is the measurement to take before placing an order. The 5-1/2 by 13-3/16 inch overall face is the footprint the vent occupies on the finished surface once it is in place, roughly three quarters of an inch of overlap on each side. That overlap is what keeps the vent from dropping into the opening rather than sitting over it. Measure the opening in the floor or wall, not the hardware you are pulling out.
Red oak is a ring-porous species with a coarse, open grain and a noticeable figure, which is why it reads as a warmer and more textural surface than maple or cherry at the same dimensions. Supplied unfinished, the vent takes stain, oil, or a clear topcoat after installation, letting the finish match what surrounds it. Because red oak is open-grained, it absorbs stain more deeply in the earlywood bands than in the latewood, which produces the characteristic two-tone figure that makes the species easy to identify. At 5-1/2 by 13-3/16 inches this vent occupies a visible area of floor or wall, so the species read matters more than it would on a smaller size.
This vent suits any existing 4 by 12 inch opening in a finished surface where a wood face is the goal, whether that is a red oak floor where a metal register would stand out, a wall where a painted or stained wood face fits the trim program, or a space where the larger opening size calls for a substantial wood presence. Confirm the opening dimensions before ordering, and confirm the installation arrangement for your surface.
The hole size is 4 by 12 inches, the opening this vent covers. The overall size is 5-1/2 by 13-3/16 inches, the full face of the vent that sits on the surrounding surface. Always match the hole size to your opening.
The listing does not state whether a damper is included. Confirm before ordering if damper control is needed for your application.
It is solid red oak, supplied unfinished, so the species is the same as a red oak floor. Wood varies piece to piece, so treat it as a species match rather than a guaranteed color match, and test your finish on a scrap piece first.
The listing does not specify orientation. Confirm the installation arrangement for your surface before ordering.
Order this vent when the opening is 4 by 12 inches and the face should be solid red oak, supplied ready to finish alongside the surrounding surface.
Sold In: 1 Each
