Wood air vents unfinished cherry give you a solid wood, one-piece construction register that drops directly into standard duct openings and provides a clean, continuous wood look across the vent and surrounding surface. This All American Wood Register Company vent is sized at 3-3/4 x 13-3/16 inches, so it matches installations laid out around that footprint where a consistent opening size matters for layout and trim. The slots are angled for optimum directional air flow, which helps you direct conditioned air into the room rather than straight up, supporting comfort without reworking duct positions. Because the units are unfinished cherry, they are ready to be stained to match your installation, allowing the vent to visually blend with cherry flooring, cabinetry, or millwork on the same job.
This drop-in wood vent is described as fitting all standard duct sizes, which means it is sized to work with common residential and light commercial duct openings that follow those standards, helping the vent seat properly in an existing cutout. The specific 3-3/4 x 13-3/16 inch dimension ties the vent to installations designed around that register footprint, which matters when aligning with flooring boards or adjacent moldings. Because the vent is solid wood one-piece construction, sanding and staining can be carried out as a single surface, helping the finish read consistently at edges and louvers. The unfinished cherry surface is intended to be stained to match your installation, allowing the same stain and topcoat system used elsewhere on cherry components to be applied to the vent for a unified appearance.
This wood air vent sits in the Decorative Hardware & Moldings and Wood Air Vents product classes, which positions it for visible locations where the register functions as part of the finished woodwork. The unfinished cherry construction supports projects that already specify cherry for flooring, trim, or casework, because the same stain schedule used elsewhere can be applied to the vent surface. The 3-3/4 x 13-3/16 inch size works in layouts that rely on that opening to align with board widths or molding breaks. Because it is a drop-in vent that fits all standard duct sizes, it can be positioned after other finishes, letting the installer coordinate the register location with final flooring lines or cabinet toe spaces that share the same duct opening.
The solid wood, one-piece construction of this All American Wood Register vent means every louver and border is cut from a single body, which supports consistent movement and expansion behavior across the face in typical interior conditions. That single-piece build also lets you sand and stain the register in one process, helping the color and sheen track with adjacent cherry components finished at the same time. Slots that are angled for optimum directional air flow direct air into the room, which reduces the need to rely on duct repositioning when aiming air toward occupied zones. Because the units are unfinished and ready to be stained to match your installation, they adapt to different stain colors within the cherry family, supporting repeatable visual results across multiple rooms or phases that share the same product line.
The wood air vent is described as 3-3/4 x 13-3/16 inches, which ties the register to duct openings and finish layouts planned around that specific footprint.
The drop-in wood vent is designed to fit all standard duct sizes, so it sits directly in the duct opening and lets the installer place it after other finish work.
The slots are angled for optimum directional air flow, so the air stream is directed into the room, which can improve comfort compared with straight vertical discharge.
This All American Wood Register vent is solid wood, one-piece construction in unfinished cherry, allowing the entire face to behave and finish like a single wood component.
The units are unfinished and ready to be stained to match your installation, so you can use the same stain and topcoat schedule as other cherry elements.
The drop-in wood vent is specified to fit all standard duct sizes, aligning the register opening with common duct rough-ins used in many residential projects.
The All American Wood Register Company wood air vent in unfinished cherry pairs a 3-3/4 x 13-3/16 inch size with a drop-in design that fits all standard duct sizes, aligning easily with typical duct layouts. Solid wood, one-piece construction gives you a single component to sand and stain, which keeps finishing steps straightforward on site or in the shop. Angled slots provide directional air flow aimed into the room, supporting functional performance alongside the appearance. For projects that call for cherry and rely on matching stain across vents, flooring, and trim, this unfinished cherry vent from Wurth Baer Supply is built to integrate into that kind of coordinated installation.
Sold In: 1 Each
