Wood air vents unfinished cherry describes an All American Wood Register drop-in vent sized 4-1/2 x 11-3/16 inches, so it matches the stated duct opening and gives a defined transition between the duct and surrounding woodwork. This vent is identified as wood air vents in the decorative hardware and moldings category, which places it as a visible finish piece in an HVAC layout and cabinetry or trim environment. The vent is part of a premium line of wood vents from All American Wood Register Company, so it is intended for use where a wood register is preferred over a metal grille. The product is unfinished cherry, which allows on-site staining to coordinate with adjacent cherry cabinets, trim, or flooring for a consistent appearance. The manufacturer part number D310-C provides a specific reference that helps align this exact cherry version with project documents or repeat orders.
The web description states that these drop-in wood vents fit all standard duct sizes, which means the 4-1/2 x 11-3/16 cherry model is sized to sit over a standard duct opening and register frame without field altering of the vent body. The drop-in style places the bearing surface on the surrounding floor, cabinet, or trim, so the vent rests by gravity into the cutout for a simple set-in step during finish work. Because the unit is solid wood, one-piece construction, handling and positioning the vent happens as a single part, which can streamline layout and orientation when aligning angled slots for the desired air direction. The unfinished cherry surface is ready to be stained before or after fitting into the opening, allowing the staining step to align with the shops finishing sequence.
This wood air vent is specified at 4-1/2 x 11-3/16 inches, so it is selected to match a duct opening called out at that size within a floor, toe-kick, or casework surface where a wood grille is preferred. Being part of a wood air vents product class and decorative hardware and moldings category, it functions as both an air outlet and a finish trim component within the room. The solid wood, one-piece construction gives the top face a continuous cherry surface, which is suited to visible locations where a metal grille would interrupt a wood design. Because the units are unfinished cherry, they can be stained to align with cherry cabinet doors, frames, or moldings, helping the vent read as part of the built-in rather than a separate element.
The vent slots are angled for optimum directional air flow, so when air exits the duct it is guided by the slot angle toward the occupied space, which supports more useful air distribution compared to a straight-through opening. This angled pattern also organizes the grille appearance, giving a consistent slot geometry across the face that matches the premium line positioning of the All American Wood Register Company wood vents. Because these are drop-in wood vents that fit all standard duct sizes, an installer can select the 4-1/2 x 11-3/16 model where that duct size is specified and rely on the drop-in lip to sit on the finished surface. The unfinished cherry, ready to be stained surface means the same finishing materials used on adjacent cherry work can be applied to the vent, helping maintain color continuity across the entire installation while still providing directional air flow from the duct.
The wood air vent is identified as 4-1/2 x 11-3/16 inches, so it is chosen to match a duct opening of that size in a floor, cabinet, or trim application.
The D310-C vent is solid wood, unfinished cherry, allowing project teams to stain the register so it coordinates with surrounding cherry or other wood finishes on site.
The drop-in wood vent design fits all standard duct sizes, so the 4-1/2 x 11-3/16 vent rests on the finished surface over a matching opening for straightforward placement.
The vents slots are angled for optimum directional air flow, so air is guided as it leaves the duct, promoting delivery into the room instead of only upward.
This model is part of All American Wood Register Companys premium line of wood vents, positioned for visible locations where a wood register is desired.
The unit is unfinished and ready to be stained, so finish products used on nearby cabinets, trim, or floors can be carried onto the register for consistent appearance.
This All American Wood Register wood air vent combines a 4-1/2 x 11-3/16 size, drop-in format, and angled slots, so it serves both as an air outlet and a visible cherry trim piece. The solid wood, one-piece construction and unfinished cherry surface allow the register to be stained as part of the same finishing schedule as surrounding cabinetry or millwork. For projects calling for a premium wood vent in a standard duct opening, this D310-C model from the wood air vents line offers a defined cherry option that coordinates with decorative hardware and moldings in the space.
Sold In: 1 Each
