Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Hettich Quadro V6 5D is the left-hand member of a full-extension, soft-close undermount slide in the 480mm nominal length, engineered for frameless cabinets and drawer boxes with 1/2 to 5/8 inch sides. The 5D designation brings five-dimensional front adjustment to the installation, letting the drawer front be tuned precisely after the box is hung. Rated 90 lb per pair, it runs on ball bearings for a smooth, consistent pull across the life of the cabinet.
The Quadro V6 5D is the right choice when drawer-front alignment cannot be left to chance. On a production run of frameless base cabinets, door-front gap consistency is the difference between a clean reveal and a call-back. The five-axis adjustment on this slide lets the installer correct height, side, depth, and tilt after every drawer is hung, speeding up the alignment process on a full kitchen rather than shimming and re-hanging boxes. The 480mm nominal length suits standard 18 to 19 inch deep frameless base drawers — the common depth in European-style production cabinetry. For face-frame cabinet work, this frameless-configuration slide is not the right fit; a face-frame version with rear mounting brackets is needed instead.
The Quadro V6 5D is built from steel with a zinc finish — a functional, corrosion-resistant coating suited to dry indoor cabinet environments. Ball bearings running in formed steel raceways give the slide its load capacity and contribute to consistent travel feel that nylon-roller Euro slides cannot match at the same load class. Because the slide is fully concealed beneath the drawer box, the zinc finish is a durability coating rather than a decorative one; what shows when the drawer is open is the underside of the box, not the slide.
Production cabinet shops building frameless European-style kitchens, bath vanities, and built-in furniture are the primary buyers. The 5D adjustment tier is especially useful on larger installs where trimming front gaps drawer by drawer adds up to real labor time. Custom shops and finish carpenters specifying a premium concealed runner for residential remodels also reach for this slide when the client wants a clean, hardware-free look with a damped close. The ball-bearing construction and 90 lb rating mean it scales from light bathroom drawers to fully loaded kitchen pull-outs without changing the slide spec.
This is the left-hand slide only — a single member. Order the matching right-hand Quadro V6 5D in the same 480mm length to make one working pair for a drawer.
The Quadro V6 5D is engineered for drawer sides from 1/2 inch to 5/8 inch (approximately 12.7mm to 16mm). Build the box to Hettich's published specification for this series, including the correct box width, bottom recess, rear notch, and locking-device drilling.
This SKU is the frameless version and mounts directly to the cabinet side panel. For face-frame installations, use the face-frame configuration of the Quadro line, which accommodates the rear bracket requirement behind the frame.
Front locking devices for the Quadro V6 are series-specific accessories. Confirm whether they are included with this SKU or need to be ordered separately; Quadro clips and brackets are not interchangeable with other brands or Quadro versions.
Five-dimensional adjustment means the mounted drawer front can be fine-tuned in five directions after the box is hung — typically height, side-to-side, depth, tilt, and a fifth axis depending on the locking device. The adjustment travels through the front locking devices, not the slide body itself, so the right locking device for this series must be on hand at install.
Match this left-hand slide with its right-hand mate, build the drawer box to the Hettich Quadro V6 spec, and add the series-specific locking devices — then the 5D adjustment handles the rest at hang time.
Sold In: 10 Each