Hettich Quadro V6 5D 20-Pack 250 mm Soft-Close Full Extension 90 lb Undermount Drawer Slide, Left Hand, Zinc, 9332639

Undermount Drawer Slide For Compact Frameless Drawer Runs

The Hettich Quadro V6 5D in 250mm is a concealed, full-extension ball-bearing undermount drawer slide for frameless cabinets — the left-hand member of a soft-close pair sized for smaller and shallower drawer boxes with 1/2 to 5/8 inch sides.

Key Features

• 250mm nominal length — suited to compact and shallow drawer boxes where longer slides will not fit.
• Full extension — brings the entire drawer out to the cabinet face for complete access to the drawer interior.
• Integrated soft-close — a damped mechanism catches the drawer near the end of travel and settles it silently shut.
• 90 lb capacity per pair — covers solidly loaded small drawers in kitchen and bath casework.
• Ball-bearing carriage, steel construction, zinc finish — precise and durable under repeated daily cycles.
• Left-hand orientation — this is one member of the pair; the matching right-hand slide completes a working set.

Where the 250mm Length Makes Sense

Most undermount slides in kitchen and bath work run 18 to 21 inches, but not every drawer does. Spice pull-outs, shallow vanity drawers, utility inserts, and secondary drawers in compact base cabinets often run on shorter boxes — and a longer slide simply will not clear the cabinet back. At 250mm (roughly 10 inches), this Quadro V6 5D fills that gap without modification. It is also a practical choice for furniture and built-in cabinetry where drawer depth is constrained by a structural panel or a design requirement rather than a cabinet standard.

Build and Finish

The Quadro V6 5D runs on a steel ball-bearing carriage — the same bearing system used throughout the Quadro runner family — which gives it smooth, controlled travel under load and consistent performance over time. The zinc finish protects the steel members through years of indoor service. Because the slide mounts beneath the drawer box and stays hidden when the drawer is open, the finish is functional rather than decorative. The 2D adjustment available through the series' locking devices allows the installed drawer front to be fine-tuned in height and side position after hanging.

Who This Slide Is For

This slide suits cabinet shops and installers building or fitting frameless casework with compact drawer boxes. It is the right call when a design or space constraint puts the drawer depth under what standard 18 inch slides require, and when soft-close and full extension are still expected. Homeowners tackling a targeted replacement — a single shallow vanity drawer, a furniture piece, or a compact utility cabinet — will find this length fills a gap that most off-the-shelf slide programs skip. The ball-bearing construction and 90 lb rating mean it performs at the same level as the longer members of the Quadro V6 5D family, just in a shorter run.

The Right Slide When Space Is the Constraint

When the drawer is shallow and the options are narrow, the 250mm Quadro V6 5D left-hand slide brings full extension, soft-close, and a 90 lb rating to compact casework without compromise — pair it with its right-hand mate and build the box to spec.