Hettich Quadro V6 5D Undermount Slide Purpose
Hettich Quadro V6 5D undermount slide is a 350mm left hand, full extension, soft-close drawer slide that supports smooth drawer travel, which helps drawers open fully for easier access to stored items. The undermount design places the slide under the drawer, which keeps the drawer sides clear for clean cabinet interiors. Integrated Silent System provides soft-close performance, which slows the drawer near closing to reduce impact on the cabinet. The slide is designed for standard applications with load capacity up to 30 kg, which supports use on typical residential or light commercial drawers holding everyday contents. A version is available for particularly light drawers up to 10 kg, which aligns the slide performance with lighter drawer loads when that configuration is used. Galvanised steel construction provides a robust metal body, which supports long-term use in cabinet environments.
Key Functional Details For Drawer Projects
- Soft-close full extension operation allows drawers to open their full 350mm length while the Silent System slows closing, which supports quieter operation and helps protect drawer fronts from harsh impacts.
- Convenient slide-on installation with 2D catches and tilt adjustment lets the drawer connect to the slide with a sliding motion and built-in catches, which can simplify mounting steps during cabinet assembly.
- Tool-less, intuitive adjustment of the drawer front panel allows height, side, depth, tilt, and radial changes to be made without tools, which speeds alignment work during installation and later fine tuning.
- Load capacity to EN 15338, Level 3 indicates the slide is tested to this standard, which gives a performance reference for installers working on projects that follow recognized drawer slide requirements.
- Maximum drawer side profile thickness of 15mm is supported in the adjustment data, which helps plan drawer box construction so the slide and adjustments work within the specified geometry.
Undermount Slide Fit, Adjustment, And Setup
The 350mm soft-close undermount drawer slide length suits drawers built for this nominal depth, which helps align cabinet depth, drawer box size, and slide travel. Full extension functionality means the drawer can travel out its full rated length, which improves access to the rear of the drawer. Height adjustment up to plus 3mm at the drawer front lets installers raise the front within this range, which helps align the front edges with adjacent fronts across a cabinet run. Side adjustment up to plus or minus 1.5mm allows the front to shift laterally within this range, which helps tighten reveals between neighboring fronts. Depth adjustment up to plus 2mm and minus 1mm supports limited in-and-out positioning of the front, which is useful for achieving a flush front plane on frameless or face-frame cabinets.
Using This Hettich 9332647 Slide In Practice
Where This Left Hand 350mm Slide Fits
This Hettich Quadro V6 5D 350mm left hand undermount slide fits drawer applications that use a 350mm runner length, which suits cabinets designed around that nominal depth. The product belongs to the undermount drawer slides class, which positions the runner beneath the drawer so visible hardware on the drawer side is avoided. The left hand orientation defines this specific runner as the left side component in a pair, which is important when selecting matching left and right parts for a drawer. Load capacity up to 30 kg for standard applications means this slide supports drawers carrying typical household or light duty contents, which matches many kitchen, bath, or office projects that use this capacity range. The availability of a version for particularly light drawers up to 10 kg provides a suited option when drawer loads are expected to be lower, which allows project planners to coordinate slide choice with drawer weight expectations.
Adjustment Features That Support Precise Results
Tool-less, intuitive adjustment of the drawer front panel covers several adjustment axes, which helps speed up achieving consistent front gaps. Height adjustment up to plus 3mm lets installers correct small vertical misalignments between adjacent drawer fronts, which can arise from cabinet or floor tolerances. Side adjustment up to plus or minus 1.5mm provides lateral movement of the front panel, which is valuable when refining equal reveals between fronts in multi-drawer stacks. Depth adjustment up to plus 2mm and minus 1mm allows minor forward or backward front movement, which helps create a uniform front plane along the cabinet. Tilt adjustment up to plus 4mm enables the top of the front to be angled relative to the bottom within this range, which is useful for aligning angled sight lines when cabinets or floors are not perfectly level. Radial adjustment up to plus or minus 1.5mm offers another fine-tuning dimension, which supports detailed front alignment for high-precision cabinet work. The integrated Silent System soft-close function works together with these adjustments, which results in aligned fronts that also close gently into position.
Common Questions About This Hettich Quadro Slide
What is the length and type of this Hettich slide?
The Hettich Quadro V6 5D undermount slide has a 350mm length and full extension operation, which supports drawers built for this depth that need access to the full drawer interior.
How much weight can this drawer slide handle?
The slide has load capacity up to 30 kg for standard applications, which suits many everyday drawer uses where contents remain within that weight range.
Does this slide provide soft-close drawer action?
The slide uses an Integrated Silent System soft-close feature, which slows and cushions the closing motion so drawers engage the cabinet quietly and with reduced impact.
What adjustment options does the drawer front have?
The slide offers tool-less adjustment with height up to plus 3mm, side plus or minus 1.5mm, depth plus 2mm and minus 1mm, tilt up to plus 4mm, and radial plus or minus 1.5mm for precise front alignment.
What drawer side thickness works with this slide?
The adjustment details specify a maximum drawer side profile thickness of 15mm, which aligns drawer box construction with the slide and its adjustment range.
What does EN 15338 Level 3 mean for this slide?
The load capacity to EN 15338, Level 3 indicates the slide has been tested to this drawer slide standard, which provides a performance benchmark for project specifications.
Selecting This 350mm Left Hand Slide
This Hettich 9332647 left hand undermount slide combines full extension travel, Integrated Silent System soft-close, and tool-less 5D adjustment, which supports efficient installation and fine front alignment. The 350mm length and up to 30 kg load capacity align with many standard drawer applications, which helps match slide performance to everyday cabinet projects. The undermount configuration uses galvanised steel construction, which contributes to durable guidance beneath the drawer. For projects using 350mm drawers with this load range, this slide offers a precise, soft-closing option ready for left side installation.
