Hettich Quadro V6 5D 10-Pack 300 mm Soft-Close Full Extension 90 lb Undermount Drawer Slide, Left Hand, Zinc, 9332643

Left-Hand Quadro V6 5D Concealed Runner For Frameless Cabinetry

This is the left-hand cabinet runner of Hettich's Quadro V6 5D series — a 300mm, full-extension, soft-close undermount slide for frameless cabinets with 1/2 to 5/8 inch drawer sides, rated 90 lb per pair and running on ball bearings with a zinc finish.

Key Features

• Left-hand orientation: this is a single left-hand runner — pair it with the matching right-hand Quadro V6 5D slide to complete one working drawer installation.
• Full extension: the drawer box travels the full 300mm nominal length, putting the entire contents within reach at the cabinet face.
• Integrated soft-close: the slide catches the drawer near the end of travel and settles it shut without slamming.
• Ball-bearing carriage: steel ball bearings in formed raceways deliver a smooth, consistent pull under load across years of daily use.
• 90 lb capacity per pair: suits loaded kitchen, bath, and utility drawers in the standard residential and light commercial range.
• 2D adjustment: the front locking devices allow post-installation fine-tuning in two directions to true the drawer front after hanging.

Where This Slide Fits the Job

The Quadro V6 5D is built for frameless cabinet construction — the slide mounts directly to the flat interior side panel without a face frame in the way. At 300mm nominal length, it suits shallower drawer applications: spice drawers, utensil drawers, and cutlery trays where a shorter box depth is the design choice rather than a constraint. The full-extension travel means the back of even a shorter box comes all the way out to the cabinet opening, so nothing gets buried. Soft-close is the motion standard expected in residential kitchens and bath vanities, and this slide delivers it from within the runner itself — no add-on damper required.

Construction and Finish

Steel members with a zinc finish handle the corrosion demands of indoor cabinetry service without adding bulk. The ball-bearing carriage distinguishes the Quadro V6 5D from roller-bearing undermounts in the same capacity class — ball bearings track more precisely under side load and hold their feel longer through high-cycle use. Because the runner is fully concealed beneath the drawer box, the zinc finish is functional rather than visible; what matters is that it protects the steel and keeps the action consistent over time.

Who Orders This Runner

Production cabinet shops running frameless European-style boxes are the natural fit here. The 300mm length works into compact base units and wall cabinet drawer inserts without requiring a custom box depth. Designers specifying handle-less or minimalist kitchens get the concealed look and soft-close action the segment demands. Contractors completing frameless installations or sourcing replacement runners for an existing Quadro V6 5D installation can match the series directly. For 3/4 inch drawer sides, a different Quadro model is required — this version is engineered for 1/2 to 5/8 inch material only.

The Right Runner, Ordered Right

Match the 300mm length to your drawer box depth, confirm the 1/2 to 5/8 inch side thickness, and add the right-hand mate and the series-specific locking devices — then this runner is ready to carry the drawer.