Hettich Quadro V6 5D undermount slide defines this 500mm left hand soft-close full extension runner as a concealed workhorse for drawers that need precise motion control. Soft-close with an Integrated Silent System slows the drawer at the end of travel, which protects fronts and keeps operation quiet in busy shop or residential settings. Full extension travel brings the drawer fully out on the undermount drawer slides, giving access to the entire drawer length for hardware, tools, or stored items. A load capacity up to 30 kg for standard applications supports typical cabinet storage, so the slide handles everyday loading demands within its rating. This undermount drawer slide sits beneath the drawer, which leaves the sides clear for clean cabinet design and smooth drawer side profiles. Galvanised steel construction resists common shop environments, supporting long-term function where moisture or handling might otherwise affect untreated steel.
Slide on installation with 2D catches lets the drawer engage the undermount drawer slides quickly from above, saving installation time when setting multiple cabinets. Tilt adjustment built into the catches allows fine-tuning of the drawer angle relative to the cabinet front, which helps align reveals across a bank of drawers. Tool-less, intuitive adjustment of the drawer front panel means height, side, depth, tilt, and radial settings are changed directly at the slide interface by hand, which shortens setup and simplifies corrections during fit-out. Height adjustment up to plus 3mm shifts the drawer front vertically, helping match adjacent fascia lines. Side adjustment up to plus or minus 1.5mm, with a maximum drawer side profile thickness 15mm, lets the installer laterally center the front while respecting material thickness limits. Depth adjustment up to plus 2mm/minus 1mm moves the front in or out, which helps flush fronts with surrounding doors. Tilt adjustment up to plus 4mm and radial adjustment up to plus or minus 1.5mm refine the top and bottom gaps, supporting tight, even reveals in frameless or face-frame layouts.
The SAP description 500MM LH QUADRO 5D UNDERMOUNT SLIDE defines this unit as the left hand runner in a 500mm Quadro setup, so it pairs with a corresponding right hand slide to support one drawer. As an undermount drawer slide in the Slides, Undermount category, it is suited to cabinetry where hidden runners and clean side panels are important, such as kitchen, bath, or shop casework. The 500mm length gives this Hettich Quadro V6 5D undermount slide reach for mid-depth drawers, so storage for tools, utensils, or supplies can extend fully out of the cabinet. Load capacity up to 30 kg for standard applications positions this runner for typical storage loads rather than heavy industrial bins, letting it serve everyday drawers within that capacity window. A version available for particularly light drawers up to 10 kg allows projects to standardize on the Quadro V6 5D platform while choosing the load-appropriate variant for small, lightweight drawers in the same line.
Tool-less, intuitive adjustment of the drawer front panel on this soft-close full extension undermount slide provides height, side, depth, tilt, and radial fine-tuning at the hardware, which streamlines achieving consistent reveals across multiple cabinets. Height adjustment up to plus 3mm and side adjustment up to plus or minus 1.5mm let installers correct small case or drawer variances, reducing rework on fronts or boxes. The max drawer side profile thickness 15mm specification defines the interface for drawer design, so builders can size side material to pair correctly with the runner. Depth adjustment up to plus 2mm/minus 1mm helps bring fronts flush to surrounding doors or panels, supporting clean face alignments. Tilt adjustment up to plus 4mm and radial adjustment up to plus or minus 1.5mm control the drawer front plane relative to the cabinet, which is important for tall fronts that must sit flat without corner proud conditions. The Integrated Silent System with soft-close action not only improves user feel, it also cushions the final closing, which is useful for protecting finely adjusted reveals from impact over time. Load capacity to EN 15338, Level 3 indicates the slide has been tested against a recognized standard, which supports confidence in performance for its intended application range.
The Hettich 9332659 is a Quadro V6 5D 500mm left hand soft-close full extension undermount drawer slide, so it mounts beneath the drawer and provides concealed, controlled motion.
This undermount drawer slide has a load capacity up to 30 kg for standard applications, which suits typical storage loads within that rating in residential or light commercial cabinets.
The Integrated Silent System provides soft-close action, slowing the drawer at the end of travel to reduce slamming, which protects drawer fronts and keeps operation quiet.
The Quadro V6 5D slide offers tool-less height, side, depth, tilt, and radial adjustment of the drawer front, which helps align reveals and front positions without disassembling the drawer.
This Hettich Quadro V6 5D undermount slide is specified for a maximum drawer side profile thickness 15mm, guiding drawer construction so the hardware interfaces correctly.
The load capacity is stated to EN 15338, Level 3, which means the drawer slide performance has been assessed according to that furniture hardware standard.
The 500MM LH QUADRO 5D UNDERMOUNT SLIDE from Hettich America Corporation combines soft-close full extension travel, EN 15338 Level 3 rating, and extensive tool-less adjustment to support precise drawer alignment. When a project calls for a 500mm left hand galvanised steel undermount drawer slide with Integrated Silent System and a load capacity up to 30 kg for standard applications, this Quadro V6 5D runner offers the tested performance and fine-tuning range needed for clean, repeatable cabinet results.
Sold In: 10 Each