Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Hettich Quadro V6 5D is a right-hand, full-extension undermount slide in the 480mm nominal length, running on ball bearings with integrated soft-close and rated 90 lb per pair. It is built for frameless cabinets and designed for drawer boxes with 1/2 to 5/8 inch sides.
The 480mm nominal length suits drawer boxes built to that specification, making it a practical choice for standard base-cabinet drawers in production frameless casework. The Quadro V6 5D installs directly to the frameless cabinet side — no face frame to work around, no rear bracket to source separately. It is the right slide for shops running concealed undermounts in European-style cabinets where a clean interior and tool-free front alignment after hanging are both priorities. The full-extension travel means pots-and-pans drawers, utensil drawers, and deep storage drawers all open to complete access, which matters when a client is assessing the finished product.
The slide body is steel with a zinc finish, which protects the members through years of indoor service while keeping weight in check. Ball bearings run between the members rather than nylon rollers, giving the slide a more precise feel under load and more consistent travel as cycles accumulate. Because the Quadro V6 5D mounts beneath the drawer box and out of sight, the zinc finish is a functional choice rather than a decorative one — the slide disappears once the drawer is installed.
Cabinet shops producing frameless kitchens and bath cabinetry will get the most from this slide. The 5D adjustment tier pays off on larger jobs where dialing in a run of drawer fronts quickly saves real time. Designers specifying handle-less or minimalist fronts benefit from the concealed profile. Installers and contractors doing replacement or upgrade work in existing frameless cabinets will find the ball-bearing action and soft-close a meaningful step up from a worn roller slide. For 3/4 inch drawer sides, a different Quadro model is needed — this version is engineered for 1/2 to 5/8 inch material only.
No. This SKU is configured for frameless cabinets, where the slide mounts directly to the flat cabinet side. Face-frame installations require a different Quadro configuration with rear mounting brackets.
Five-dimensional adjustment means the installed drawer front can be fine-tuned in up to five directions — typically height, side, tilt, depth, and an additional axis — through the front locking devices after the drawer is hung. Verify the exact adjustment directions and ranges against the Hettich Quadro V6 5D installation documentation for this series.
This is the right-hand member only. Order the matching left-hand 480mm Quadro V6 5D slide separately — one drawer requires one left-hand and one right-hand slide to function.
Quadro front locking devices are series-specific accessories. Confirm whether locking devices ship with this SKU or are sold separately before completing your order.
Yes. Undermount slides require the drawer box to be built to the manufacturer's published specification: 480mm nominal length, the correct box-width formula for this series, bottom recess, rear notch, and drilling for the locking devices. A standard off-the-shelf box will not seat correctly.
Pair this right-hand slide with its left-hand mate, build the box to spec, and the Quadro V6 5D delivers quiet, full-extension travel with the front-adjustment capability to finish the job cleanly.
Sold In: 10 Each