Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Series 200 concealed hinge opens half overlay doors to 165 degrees on both face-frame and frameless cabinets, with a self-close spring and a nickel finish that coordinates with standard cabinet hardware.
The 165 degree opening sets this hinge apart from a standard 110 degree model. At that angle the door swings wide enough to clear a wall or the cabinet beside it, making it the right call for corner runs, peninsula layouts, or anywhere a door that barely clears its neighbor creates a daily annoyance. The half crank arm places each door at a partial overlay, so two doors can share one center partition without their arms colliding. The 35mm cup bores into the back of the door, and the arm screws directly to a base plate on the cabinet, which is a separate purchase matched to your cabinet construction. Salice plates are specific to this system, so pair this hinge with a Salice plate.
The hinge body is steel with a nickel finish. Nickel sits between chrome and satin brass on the warm-cool scale, making it one of the easier finishes to carry across a mixed hardware spec. It reads neutral against both white and wood-toned cabinets, so it works in kitchens, baths, and built-ins where the pulls and knobs are already in a nickel family. The side adjustment of plus 4.5 mm or minus 1.5 mm, combined with plus or minus 2 mm of height adjustment, gives enough range to bring a pair of doors to a matched reveal after the box is set.
Reach for this hinge when the door layout puts a premium on swing clearance and the hardware spec calls for nickel. It suits cabinet shops and contractors working on face-frame or frameless boxes in tight kitchens, corner configurations, and peninsula runs where doors need to open without blocking adjacent traffic. Because the self-close spring pulls the door shut rather than cushioning it, this hinge is the right fit when the priority is reliable automatic closing and the wider swing, not a soft, damped settle. For a quieter close on the same overlay and cabinet type, the Silentia+ soft-close version of this series is the model to quote instead.
It works on any standard cabinet, but it earns its keep most in tight or corner layouts where a standard 110 degree hinge would leave the door blocking access. For open runs without space constraints, a standard-angle hinge gets the job done at a lower cost.
No. Self-close uses a spring to pull the door shut over the last few degrees, but it does not cushion the contact. Soft-close adds a damper that slows the door so it settles quietly. This hinge is self-close only. For a damped close, choose the Silentia+ soft-close version of this series.
Yes. The arm screws to a base plate that mounts on the cabinet side or face frame, and that plate is sold separately. Use a Salice plate matched to your cabinet type, since Salice plates are specific to this system and are not interchangeable with other brands.
Yes, it works on both. The plate you choose determines the mounting approach, so select a Salice face-frame plate or frameless plate to match the box.
When the project calls for wide-opening half overlay doors in nickel, this Salice Series 200 hinge delivers the clearance and the coordinated finish in one dependable part.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  UBS2BF37XY Mfr# S2BF37XY | Salice110° Angle Reduction Clip S2BF37XY | ||||
Sold in: 2000 Each |  UBS2AM37XG Mfr# S2AM37XG | Salice Silentia 155° to 120° Hinge Angle Reduction Clip S2AM37XG |
