Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Series 200 concealed hinge hangs full overlay doors on face-frame and frameless cabinets, opening to 165 degrees for near-flat access, with a self-close spring and a dowel-mount cup in a nickel finish.
Most standard cabinet hinges open to 110 degrees, which works well for everyday access. This hinge goes to 165 degrees, bringing the door nearly parallel with the cabinet side. That matters in base cabinets where a deeply set drawer or pull-out needs a clear path, in pantry columns where the door would otherwise block part of the opening, and on wall cabinets over a peninsula where a standard swing would clip the countertop corner. The 35mm cup bores into the back of the door and the arm fastens to a Salice base plate on the cabinet, which is ordered separately. Use Salice plates; plates are brand-specific and will not transfer to another brand's hinge.
The hinge body is steel in a nickel finish. Nickel sits in the middle of the hardware spectrum: warmer than chrome, cooler than brass, and compatible with the brushed pulls, bar handles, and faucet finishes that show up across a wide range of kitchen and bath styles. In a shop running multiple finish families, nickel is often the safe call for projects where the hardware spec has not been locked in. The self-close spring delivers a reliable, repeatable pull-shut without the added damping of a soft-close mechanism, keeping the part count simple for projects where quiet close is not a requirement.
The dowel-mount cup targets CNC-driven production lines. Rather than driving cup screws at each door, the cup's pre-attached dowels press into bored holes, which takes a step out of the assembly sequence on high-volume runs. This hinge suits cabinet shops producing face-frame and frameless boxes side by side, custom builders fitting pantry towers and tall utility columns where that extra swing matters, and remodelers replacing existing Salice Series 200 hardware who want a consistent match. It is a self-close hinge, so for projects where a cushioned, slam-free close is the expectation, the soft-close version of the Series 200 is the right substitute.
Yes. The hinge arm clips to a base plate that mounts to the cabinet side or stile, and the plate is sold separately. Pair it with a Salice plate matched to your cabinet construction and the overlay position you need.
This hinge is self-close only. At wide opening angles, soft-close is not offered. The spring pulls the door shut but does not cushion the close.
A dowel-mount cup carries pre-attached dowels that press into bored holes in the door with no cup screws. A screw-on cup fastens with wood screws. Dowel mount is faster on a CNC line where the holes are already bored; screw-on suits one-off installs or replacement work.
Yes. Use a face-frame plate for stile-mounted applications and a frameless wing plate for side-panel mounting. The hinge body is the same for both; the plate choice sets the cabinet type.
Specify this hinge when the job calls for a wide-opening full overlay door, a nickel finish that works across hardware families, and a production-friendly dowel cup that keeps assembly moving.
Sold In: 1 Each
