Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Salice 200 Series 165 degree hinge is a self-closing concealed hinge designed for projects that require hidden hardware, so cabinet doors close cleanly while leaving the hardware out of sight for a streamlined installation. The hinge is specified for both residential and commercial cabinets, which lets one hardware choice carry across kitchen, bath, office, or institutional casework on the same job. As a full overlay hinge for face-frame and frameless cabinets, it is suited to cabinets where the door covers the front, supporting consistent reveals across a run. The all steel hinge construction gives the joint a solid feel in service. Its nickel plated finish provides corrosion resistance, supporting performance in typical cabinet environments where humidity and cleaning cycles are common. The hinge is permanently self lubricating with environmentally safe lubricants, so its motion remains smooth without separate lubrication steps during the life of the installation.
This hinge is designed as a 165 degree self-closing hinge, so doors can open to a wide angle while still returning to the closed position under the hinge mechanism. The hinge uses an 11 mm cup depth, which makes it compatible with most cabinet door profiles that accept a shallow hinge cup, reducing restrictions when specifying door designs. A hinge cup edge drilling distance of 3 mm to 6 mm is supported, giving some flexibility for boring position on the door edge while staying within the hinge geometry. The Series 200 hinge provides patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm via a hinge arm screw, so the installer can shift the door laterally to tune reveals along a cabinet face.
The hinge is a full overlay option for face-frame and frameless cabinets, so it is suited to layouts where the door overlays the front of the case, whether a frame is present or not. Being designed for both residential and commercial cabinets, it can be specified in kitchens, baths, office casework, or commercial millwork using the same hardware line, which simplifies hinge selection across different spaces. The 165 degree opening angle supports cabinets that benefit from a wide sweep, such as corner or deep storage cabinets, while still closing under a self-closing mechanism. Its role as part of an integrated system of concealed hinges means it fits into projects that standardize on the Salice Series 200 platform, allowing other Series 200 hinge options to be used where different opening angles or applications are needed.
The 11 mm cup depth on the Series 200 165 degree hinge allows it to sit in a relatively shallow bore, which helps when working with thinner door profiles that still meet the cup depth requirement. The hinge cup edge drilling distance range of 3 mm to 6 mm provides a workable window for boring accuracy, so doors can be machined within this range and still align with the hinge geometry. Patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm through the hinge arm screw lets an installer fine-tune reveals after mounting, which is useful when cabinets or walls introduce minor alignment variation. The all steel nickel plated construction supports both structural stability and corrosion resistance at the hinge, while the permanently self lubricating design keeps motion consistent under regular door cycling. Exceeding ANSI/BHMA Grade 2 standards and meeting ISO9001 and ISO14001 certifications positions this hinge for applications where documented performance and quality systems matter to the project specification.
The Salice C27FA99 hinge is designed for residential and commercial cabinets, so it can be used on kitchen, bath, and commercial casework specified around concealed hinges.
The Salice 200 Series C27FA99 hinge is a 165 degree self-closing hinge, allowing doors to open to a wide angle while still returning to the closed position.
The Salice 200 Series hinge has a cup depth of 11 mm, so the door needs a bore to that depth to seat the hinge cup properly in the panel.
The hinge cup edge drilling distance ranges from 3 mm to 6 mm, giving flexibility for the cup location while keeping the hinge geometry within its design range.
The Salice 200 Series hinge offers patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm through a hinge arm screw, helping align door reveals after mounting.
The Salice Series 200 hinge is designed to work with all Salice mounting plates and is compatible with Smove soft-close devices, supporting a coordinated hardware setup.
The Salice Rapido self closing hinge C27FA99 combines a 165 degree opening angle with full overlay use on face-frame and frameless cabinets, so it fits wide-opening overlay doors across different cabinet constructions. Its 11 mm cup depth and 3 mm to 6 mm cup edge drilling distance support common door machining patterns. Side-to-side adjustment from plus 4.5 mm to minus 1.5 mm via the hinge arm screw helps bring door reveals into line after mounting. With all steel nickel plated construction, permanent self lubrication, and performance exceeding ANSI/BHMA Grade 2 standards, it suits cabinet projects that call for a concealed hinge with documented durability and adjustment range.
Sold In: 1 Each
