Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Series 200 Logica hinge hangs half overlay doors on face-frame and frameless cabinets, opening to a wide 165 degrees and closing on a self-close spring, with toolless arm engagement for fast installs.
The 165-degree opening is the defining spec here. Where a standard 110-degree hinge leaves the door at a right angle to the cabinet box, this hinge swings the door close to parallel with the side panel, clearing the way into deep base cabinets, pantry pulls, or storage columns where a narrow swing would block the view. The half crank geometry is built for the door pairs that meet on a single center partition, each door covering about half the shared stile or panel edge rather than the whole cabinet side. The 35mm cup bores into the back of the door, and the arm clips to a Salice base plate on the cabinet, ordered separately as its own SKU. Salice plates are brand-specific, so use plates from the same Salice line to ensure the arm connection seats correctly.
The hinge body is plated steel, with a nickel finish that reads as a cool, brushed tone alongside pulls, knobs, and other visible hardware in satin or brushed nickel. The Logica toolless clip engages the base plate quickly and releases the same way, which matters on a run of doors where every hinge is set and adjusted in sequence. Side adjustment of plus 4.5 mm and minus 1.5 mm, combined with plus-or-minus 2 mm of height adjustment, lets installers bring a pair of doors to an even reveal after the cabinets are set.
This is the right pick for cabinet shops and installers specifying partial-overlay doors on either frameless production boxes or face-frame cabinets, anywhere the job calls for a wide swing rather than a standard opening. It suits kitchens where deep base cabinets benefit from a door that folds almost out of the way, as well as utility rooms and storage walls where full access to the interior is a practical priority. For a project that calls for a cushioned, damped close rather than a spring pull, the Silentia+ soft-close version of the Salice 200 Series is the one to specify instead. Standard doors in the 16 to 22mm thickness range are the correct fit for this hinge.
No. The hinge clips to a base plate that mounts to the cabinet, and the plate is sold separately. Use a Salice plate matched to your cabinet construction and overlay position.
No. This is a self-close hinge: a spring pulls the door shut over the last few degrees. It does not cushion or slow the close. For a damped, quiet close on the same overlay, choose the Silentia+ soft-close version of this series.
No. Salice plates are specific to Salice hinges, and the arm connection will not seat correctly on a plate from another brand. Pair this hinge with Salice plates only.
A 165-degree swing clears the door nearly flat to the cabinet side, which opens up full access to deep or wide interiors where a standard 110-degree door would partially block the opening. It is especially useful on base cabinets, pantry columns, and any storage run where interior reach matters.
Specify this hinge when the job calls for half overlay doors that swing nearly flat, close on their own, and clip into place quickly across a full run of cabinets.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  UBS2BF37XY Mfr# S2BF37XY | Salice110° Angle Reduction Clip S2BF37XY | ||||
Sold in: 2000 Each |  UBS2AM37XG Mfr# S2AM37XG | Salice Silentia 155° to 120° Hinge Angle Reduction Clip S2AM37XG |
