Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Series 200 Logica hinge brings 165-degree opening to 1/2-inch overlay doors on face-frame and frameless cabinets, with a self-close spring and toolless arm engagement in a nickel finish.
Most concealed hinges open to 110 degrees, which is plenty for everyday kitchen access. The 165-degree opening here is a different tool for a different situation. It lets a door swing back far enough to lie nearly parallel to the cabinet side, clearing the opening completely. That matters in a pantry where the full shelf depth needs to be reachable, in a corner layout where a swung-open door would otherwise block an adjacent run, or in a workspace where keeping a door out of the way during a long task is worth specifying for. The 35mm cup bores into the door in the standard way, and the arm clips to a Salice base plate on the cabinet, ordered separately.
The hinge is plated steel in a nickel finish, consistent with the rest of the Salice Series 200 line. Nickel reads as a warm, slightly understated silver that coordinates with brushed or satin metal hardware across the project, and it holds its appearance reliably in the cabinet environment. The half-crank arm geometry sets the 1/2-inch overlay position, and the side and height adjustment lets you tune the reveal at installation without shimming.
Reach for this hinge on face-frame or frameless cabinets where partial-overlay doors need wide clearance. It suits pantry cabinets, appliance garages, and storage units where the widest possible door travel is the design requirement. For projects where two doors share a center partition, the half-crank geometry handles that layout cleanly. Use Salice base plates: the arm engagement and plate geometry are brand-specific, and plates from other manufacturers will not connect. For a damped, cushioned close rather than a spring pull, the Silentia+ soft-close version of this series is the one to specify instead.
No. The hinge clips to a base plate that mounts separately to the cabinet, and that plate is sold separately. Select a Salice plate matched to your cabinet construction and door position.
This hinge is self-close: a spring draws the door shut once it reaches a few degrees from closed. Soft-close uses a damper to slow and cushion the door as it closes. This hinge pulls the door shut but does not slow or cushion the contact. For a dampened close, look at the Silentia+ soft-close version of this series.
The self-close spring engages over the last few degrees of closing regardless of how far the door was opened. The wide opening angle does not change the closing behavior.
Yes. This hinge works on both face-frame and frameless cabinets when paired with the appropriate Salice base plate for your cabinet type.
Specify this hinge when the project calls for 1/2-inch overlay doors that open wide and close on their own, in a nickel finish that holds up across the life of the cabinet.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 2000 Each |  UBS2AM37XG Mfr# S2AM37XG | Salice Silentia 155° to 120° Hinge Angle Reduction Clip S2AM37XG | ||||
Sold in: 1 Each |  UBS2BF37XY Mfr# S2BF37XY | Salice110° Angle Reduction Clip S2BF37XY |
