Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice 200 Series Rapido hinge hangs half overlay doors on face-frame and frameless cabinets, with a self-close spring and a 165-degree opening angle, mounted via an expanding dowel for a firm, stable connection.
A 165-degree opening takes the door almost parallel with the cabinet side, clearing the opening nearly completely and making it easy to reach items stored toward the back or corners. That kind of access matters in pantry cabinets, deeper upper cabinets, and any run where the door would otherwise block part of the interior. The half crank sets the door at a partial overlay, covering roughly half the cabinet side or sharing the center partition with the adjoining door on a double-door cabinet. The 35mm cup bores into the back of the door, and the arm connects to a Salice base plate on the cabinet, which is sold separately. Use Salice plates with this hinge; plates are not interchangeable across brands.
The hinge body is steel with a nickel plating. Nickel reads as a warm, slightly muted silver that sits naturally next to brushed nickel pulls, satin nickel knobs, and similar hardware finishes without competing with them. The expanding dowel mount adds a layer of mechanical stability beyond a standard screw-on plate: the dowel expands into the bored hole in the cabinet side, locking the plate in place and reducing the micro-movement that can loosen connections over years of daily use. Height adjustment of plus or minus 2mm and a side adjustment range of plus 4.5mm to minus 1.5mm let you bring doors to an even reveal after the cabinet is installed.
This hinge suits cabinet shops, remodelers, and contractors working on face-frame or frameless boxes where a partial-overlay door needs a wide opening and a self-close return. It is a practical choice for pantry cabinets, appliance storage, and multi-door runs where full interior access is a priority. The self-close spring keeps doors from being left ajar without the added cost of a soft-close damper. If a project calls for a cushioned, slam-free close, the Silentia+ soft-close version of the 200 Series is the one to specify instead. For doors thicker than approximately 22mm, a thick-door hinge is the correct choice over a standard-series hinge like this one.
No. The expanding dowel is how the base plate fastens to the cabinet, not a substitute for it. A Salice base plate is still required and sold separately. The dowel anchors that plate more firmly than a screw-on connection alone.
No. This is a self-close hinge: a spring pulls the door shut over the last few degrees of travel. It does not cushion or slow the close. For a damped, quiet close, choose the Silentia+ soft-close version of the 200 Series.
No. Salice plates are specific to Salice hinges. A plate from Blum, Grass, or another brand will not connect to this arm. Match a Salice base plate to your cabinet construction and the overlay you need.
At 110 degrees the door sits at a right angle to the cabinet face, which is fine for most everyday access. At 165 degrees the door swings nearly flush with the cabinet side, clearing the opening almost completely. That extra clearance is useful in pantry cabinets, deep boxes, and tight kitchen layouts where the door would otherwise block reach-in access.
Specify this hinge when the design calls for half overlay doors that open nearly flat, close on their own, and carry a nickel finish that works alongside the rest of the hardware in the space.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  UBS2BF37XY Mfr# S2BF37XY | Salice110° Angle Reduction Clip S2BF37XY | ||||
Sold in: 2000 Each |  UBS2AM37XG Mfr# S2AM37XG | Salice Silentia 155° to 120° Hinge Angle Reduction Clip S2AM37XG |
