Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Series 200 concealed hinge seats inset doors flush inside the cabinet opening on both face-frame and frameless cabinets, with a self-close spring and a wide 165 degree swing, in a nickel finish that coordinates with stainless and brushed hardware throughout the room.
Inset doors sit inside the cabinet box rather than over it, which is the look most associated with furniture-grade cabinetry and traditional built-ins. The door has to clear the opening edge cleanly as it swings, and the 165 degree arm geometry on this hinge carries it back far enough to give unobstructed access to the full interior. That wide arc is especially useful on kitchen base cabinets and pantry cabinets where the door would otherwise block reaching across a shelf. The 35mm cup bores into the door, and the arm connects to a Salice base plate mounted to the cabinet side or face-frame stile, ordered separately. The plate is Salice-specific, so pair it with a plate from the Series 200 range to match this hinge's arm engagement and bore pattern.
The hinge body is plated steel. The nickel finish gives it the slightly warm, low-sheen look that reads as satin hardware, sitting naturally beside brushed nickel pulls, bar handles, and stainless appliances without competing with them. Inset installations demand a close reveal all around, and the side and height adjustment built into this hinge is what keeps that reveal even over time as the cabinet settles. The self-close spring is a practical add here too: on a closely fitted inset door, a spring that draws the door home protects the fit by preventing the door from resting half-open against the frame edge.
Cabinet shops building inset-door lines need a hinge that works across both frameless boxes and face-frame construction without switching part numbers, and this one handles both. Designers specifying furniture-style cabinetry with a nickel hardware package can call this hinge and know the finish reads consistently. Contractors finishing a renovation alongside stainless appliances and satin fixtures get a concealed hinge that disappears when the door closes and coordinates with what is already on the wall. Doors in the standard 16 to 22mm range are the right fit for this hinge. For doors thicker than 22mm, a thick-door series is the correct choice.
No. The hinge clips to a base plate that mounts separately to the cabinet. Use a Salice Series 200 plate matched to your cabinet construction. Plates from other brands will not connect to this hinge.
The cup carries pre-attached dowels that press into bored holes in the door without cup screws. It is the faster CNC-friendly method used in production environments where boring the door is already part of the workflow.
Yes. It is designed for both. On face-frame cabinets the base plate mounts to the stile; on frameless boxes it mounts to the side panel. Confirm the plate style matches your cabinet type when you order it separately.
No. This is a self-close hinge: a spring pulls the door shut over the final degrees of travel. It does not cushion or slow the close the way a damped soft-close hinge does. For a damped, quiet close on an inset door, look to the Salice Silentia+ version of the Series 200.
When the project calls for flush inset doors with broad access, consistent reveals, and a nickel finish that coordinates across the hardware package, this Salice hinge is the straightforward answer for both face-frame and frameless work.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  UBS2BF37XY Mfr# S2BF37XY | Salice110° Angle Reduction Clip S2BF37XY | ||||
Sold in: 2000 Each |  UBS2AM37XG Mfr# S2AM37XG | Salice Silentia 155° to 120° Hinge Angle Reduction Clip S2AM37XG |
