Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Series 200 concealed hinge is built for inset doors on face-frame or frameless cabinets, opening to 165 degrees with a self-close spring and a plated nickel finish.
The 165 degree opening angle is the defining reason to choose this hinge over a standard 110 degree version. Where a door needs to clear a wall, land nearly flat, or stay out of the way in a tight kitchen run or built-in, 165 degrees does what 110 cannot. The inset geometry places the door flush within the opening rather than over it, so every hinge on a run must be set for inset. The 35mm cup bores into the back of the door, and the arm screws to a Salice base plate mounted on the cabinet side or face frame, purchased separately. Use Salice plates with this hinge; plates are brand-specific and will not connect across brands.
The hinge body is plated steel finished in nickel, a tone that blends cleanly with brushed hardware and light cabinet interiors. Inset work tends to show hardware context more than overlay does, since the gap around the door draws the eye, and a consistent finish across hinges and other visible hardware keeps the look cohesive. This is a self-close hinge: the spring pulls the door shut but does not cushion the close. If a damped, quiet close is the goal, the Silentia+ soft-close version of this series is the correct pick.
Specify this hinge for built-ins, library cabinets, furniture pieces, and kitchen runs where flush inset doors need a near-flat swing. Cabinet shops doing face-frame work and installers fitting frameless boxes can both use it. Inset fitting demands tighter tolerances than overlay, so it suits projects where the installer can take the time to fit doors precisely. For doors in the standard 16 to 22mm thickness range. Doors thicker than 22mm need a thick-door hinge rather than this standard cup depth.
No. This is a self-close hinge: the spring pulls the door shut but does not slow the close. Soft-close is not available at this opening angle. For a damped close, look at the Silentia+ soft-close versions of this series at narrower angles.
No. The hinge clips to a base plate that is sold separately. Match a Salice plate to your cabinet construction, whether face-frame or frameless, and to the inset position.
An inset door sits flush inside the cabinet opening with a small reveal on all sides. A full overlay door covers nearly the entire cabinet side. These are set by the hinge arm geometry, not by adjustment, so this hinge is for inset doors only.
Yes. This hinge works on both construction types when paired with the appropriate Salice base plate for each.
When the design calls for inset doors that open wide and close on their own, this nickel Salice hinge delivers the angle and geometry to make it work on either cabinet type.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  UBS2BF37XY Mfr# S2BF37XY | Salice110° Angle Reduction Clip S2BF37XY | ||||
Sold in: 2000 Each |  UBS2AM37XG Mfr# S2AM37XG | Salice Silentia 155° to 120° Hinge Angle Reduction Clip S2AM37XG |
