Knape And Vogt 8505 Drawer Slides For File Use

Knape and Vogt 8505 drawer slides in the 14 inch length provide a right hand cabinet member for side mount file drawers, so you can match existing 8505 hardware when setting up cabinets that follow the same slide family. The side clearance of 1/2 inch plus 1/32 inch minus 0 inch on each side defines the required spacing between drawer and cabinet, which helps cabinetmakers size drawer boxes to run smoothly in heavier file drawer applications. A height of 3-51/64 inch including the quick disconnect rail sets the slide envelope inside the cabinet, allowing planning for deeper file rails or tall drawer sides. The anochrome finish on the slide gives a uniform metal appearance that suits commercial or residential casework where exposed hardware should look consistent. KV Model 8505 is made in USA, which appeals to shops standardizing on North American-made ball bearing file drawer slides.

File Drawer Slide Details That Support Workflow

• The side mount design places this right hand cabinet member on the cabinet side, which leaves the drawer box interior clear and supports typical file drawer layouts that need full-width usable space.
• Side clearance of 1/2 inch plus 1/32 inch minus 0 inch per side defines the drawer-to-cabinet gap, helping builders cut drawer widths accurately to avoid racking and to keep slides running consistently under file loads.
• The 3-51/64 inch overall height including the quick disconnect rail sets the vertical space this member occupies, guiding rail placement when stacking multiple drawers in a cabinet with tight vertical spacing.
• The 32 mm pattern is present on this cabinet member, which lines up with cabinet systems drilled on 32 mm centers and streamlines layout for casework built on that standard hole spacing.
• A progressive movement on ball bearings controls how the slide members extend, creating a smooth feel that benefits file drawers opened and closed repeatedly throughout the workday.
• The anochrome finish on the slide surfaces provides a consistent metallic look that blends into typical cabinet interiors and fits well in both office and shop environments.

Side Mount Installation And Disconnect Details

This right hand side mount cabinet member is part of the KV 8505 ball bearing file drawer slide system, so it installs along the cabinet wall in line with the 32 mm pattern when that drilling system is used. Factory-attached drawer release clips with quick disconnect drawer members are part of the design, which lets installers remove drawers for adjustments or service without separate clips to manage. The recommended fasteners are #7 x 5/8 inch Phillips pan head screws labeled BST5/8-7-2C, giving a screw size that matches the mounting holes and helps secure the member to cabinet sides. Positive in and out stops are integrated into the slide action, which keeps the drawer travel defined at both ends and supports repeatable positioning in file storage applications.

Why This Right Hand 8505 Member Fits File Work

Where This 14 Inch Slide Member Is Used

The 14 inch right hand cabinet member in the 8505 series is aimed at file drawer use, so it suits cabinets designed around that slide length where drawers carry hanging files or similar loads. Because the member height is 3-51/64 inch including the quick disconnect rail, it works in file drawer designs that expect a taller slide profile to support drawers with deeper sides. The side clearance of 1/2 inch plus 1/32 inch minus 0 inch on each side defines how wide the drawer box can be relative to the opening, which matters when building file drawers that need tight but reliable running clearances. This cabinet member is part of a side mount, ball bearing slide system, so it sits on the cabinet side rather than under the drawer, keeping the bottom area open for file rails or other hardware in the drawer box.

Details That Support Smooth, Repeatable Operation

The hold-in feature with anti-rebound behavior is built into the 8505 slide design, and that function helps keep drawers from drifting open after closing and from bouncing back during normal use in file cabinets. A retainer that holds 3 bearings per inch of race supports the ball bearing carriage, which contributes to quiet motion and steady support as the drawer moves between closed and full extension. Progressive movement on ball bearings coordinates how the slide sections extend, so the drawer opens in a controlled sequence that feels smooth even when users pull hard on a loaded file drawer. Positive in and out stops define the travel limits of the member, protecting against over-travel at the rear and keeping the front position repeatable for face alignment. KV Model 8505 being made in USA ties this member into a slide family many shops already specify, simplifying standardization across cabinet runs.

Common Questions About KV 8505-98 14 Right Member

Select This 8505 Member For Matching Installations

The KV 8505-98 14 right hand cabinet member combines a defined 14 inch length, 1/2 inch plus 1/32 inch minus 0 inch side clearance, and a 3-51/64 inch height, which helps align new or replacement file drawers to existing 8505-based casework. Its anochrome finish, 32 mm pattern, and side mount layout tie directly into cabinets built on that drilling standard, while progressive ball bearing movement and positive stops support frequent file drawer use. For shops and serious DIY builders working with the Knape and Vogt 8505 series, this USA-made right hand member provides the matching component needed to keep slide specifications consistent across a project.