Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt 26 inch over travel drawer slide uses the KV Model 8505 platform to give file drawers extended travel beyond the cabinet front, which opens the drawer farther for easier access to stored files in deeper installations. This side mount drawer slide is classified as a Side Mount Drawer Slides product, so it mounts to the drawer sides and cabinet sides to support typical file drawer box construction. Its over travel action works with the ball bearing mechanism to move the drawer fully and then beyond the opening, which matters when file folders or contents sit low in the drawer and need clear exposure. The slide is unhanded, so the same member design works on either side of the drawer, simplifying layout when setting up multiple cabinets.
This side mount ball bearing drawer slide is defined as having 1/2 inch plus 1/32 inch minus 0 inch side clearance per side, so drawer widths can be dimensioned precisely from cabinet openings to avoid racking that disrupts the ball bearing race. The specified height of 3-51/64 inch including the quick disconnect rail sets the vertical envelope, which supports predictable drawer spacing when planning multiple file drawer stacks. The presence of a 32 mm pattern directly supports cabinet cases drilled on 32 mm centers, letting the slide fasten to those rows without additional layout work. As a Side Mount Drawer Slides product, this KV 8505 side mount drawer slide works with face frame or frameless designs that accept side-mounted hardware.
The Web Description identifies this part as a 26 inch length KV Model 8505 file drawer slide, so it is suited to file drawers built around that length where extended travel improves reach to stored folders. The slide is described as a Ball Bearing Slide in the Drawer Slides & Accessories category, and that bearing construction supports smooth and quiet motion when drawers cycle repeatedly in office or commercial cabinetry. Factory-attached drawer release clips with quick disconnect drawer members are specified, so the drawer portion can be separated from the cabinet member using those clips, which simplifies fitting drawers during shop assembly or later removal for service. The slide also has a hold-in feature to prevent bounce back, which keeps the drawer held at the closed position so normal closing force does not cause the drawer to drift open in daily use.
This 8505P 26 drawer slide is stated to have positive in and out stops, so the travel limits are defined within the slide members and prevent over-extension or over-closure that might damage the ball bearing races during aggressive operation. The retainer is described as holding 3 bearings per inch of race, and that dense bearing distribution supports smooth and quiet motion along the full travel path while sharing load across multiple points. Progressive movement on ball bearings is also specified, meaning the intermediate members move in sequence, which produces a stable, controlled feel from closed to full over travel that matters on heavy file drawers. Factory-attached drawer release clips, combined with the quick disconnect drawer members, allow installers to remove the drawer section without tools at those clips, helping with finishing, onsite adjustments, or transport through tight spaces.
The 8505P 26 is a Knape and Vogt KV Model 8505 side mount ball bearing file drawer slide, so it mounts on the drawer sides and uses ball bearings for smooth motion.
The over travel on this 26 inch ball bearing file drawer slide lets the drawer extend beyond the cabinet front, improving access to files stored toward the rear of the drawer.
This slide calls for 1/2 inch plus 1/32 inch minus 0 inch side clearance on each side, guiding drawer width sizing so the ball bearing members operate smoothly in the cabinet opening.
This KV 8505 side mount drawer slide is specified as having a 32 mm pattern, so it aligns with cabinet cases drilled on 32 mm line-bore hole spacing.
The 8505P 26 drawer slide height is 3-51/64 inch including the quick disconnect rail, which determines vertical space needed between drawers in a stacked layout.
This drawer slide has a hold-in feature to reduce bounce back and positive in and out stops, so drawers stay closed and stop safely at the travel limits during everyday operation.
This Knape and Vogt 26 inch over travel drawer slide pairs a specified 26 inch length with 1/2 inch plus 1/32 inch minus 0 inch side clearance, giving cabinet builders concrete numbers for sizing file drawers. The 3-51/64 inch height including quick disconnect rail, combined with the 32 mm pattern, supports integration into line-bored commercial casework. Features such as factory-attached drawer release clips, progressive movement on ball bearings, and hold-in with positive stops create a defined operating feel that suits office file drawers and similar storage. For projects that match these dimensions and mounting details, this 8505P 26 drawer slide offers a clearly defined, repeatable hardware choice.
Sold In: 1 Set
