Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Steel table legs from the Peter Meier Hamburg Series provide a heavy-duty support option for work surfaces and counters where a single leg must handle substantial load. Each leg has a 2-3/8 inch diameter, so the support footprint stays compact while still delivering strong vertical support for counter top height applications in shops, offices, or residential projects. The 34-1/4 inch counter height measurement aligns the top of the leg with standard counter height layouts when paired with typical top thicknesses, which helps keep finished surfaces on a consistent plane with adjacent cabinetry. A load bearing capacity of 660 lbs per leg gives wide margin for heavy tops or concentrated loads at one corner. The single pack format focuses on one-leg situations such as peninsulas, overhangs, and support at free corners.
Each Hamburg Series steel table leg in this configuration has 1-1/8 inch adjustment built into the foot, allowing the installer to raise or lower the support within that range once the leg is positioned under the top. That adjustment helps bring an uneven floor, a bowed top, or a long run of counters back into level by dialing in the height at the foot rather than cutting metal. With the leg set at 34-1/4 inch counter height plus the adjustable foot range, there is flexibility to fine-tune the final surface elevation to neighboring cabinets or appliances. The leg is designed to work with a separate bracket used to attach the leg to the table, so the load transfers from the bracket into the steel tube and down through the adjustable foot into the floor.
This Camar Hamburg Series 2-3/8 inch steel table leg at counter top height suits work surfaces, counters, and tables that need a single structural support point at approximately 34-1/4 inches. The combination of a compact tube diameter and a 660 lb per leg capacity suits island overhangs, peninsulas, and return counters where the top projects beyond base cabinetry. In shop environments, the steel construction and counter height format work well under work surfaces or assembly benches that align with existing casework. The flat black finish ties in with darker interiors or contemporary designs, helping the leg read as a clean vertical support rather than a visual focal point. Because this single pack focuses on one leg at counter height, it is well matched to projects where only one additional support point is needed to stabilize a corner or cantilevered section.
The 1-1/8 inch adjustable foot built into this Hamburg Series leg directly affects how quickly an installer can bring a counter into level without field-cutting metal. On floors that run out of level, the adjustment range compensates for low or high spots while keeping the steel tube itself uncut, which supports consistent appearance across multiple legs when used in a run. The 660 lb per leg load bearing capacity means the leg can carry a substantial share of a heavy top, so designers can rely on a single support point at a corner or along an edge. When the 34-1/4 inch counter height dimension is combined with the adjustment range, installers can dial in precise elevation to meet adjacent cabinets or fixtures while keeping the leg plumb. The flat black finish on the steel surface contributes to a finished look that coordinates with other black hardware and components in the space.
This Hamburg Series steel table leg has a counter top height of 34-1/4 inches, so it aligns the supported surface with standard counter height layouts in kitchen, office, or workroom installations.
This steel table leg has 1-1/8 inch adjustment built into the foot, allowing fine-tuning of the final counter height to compensate for uneven floors or variations in top thickness.
This Hamburg Series steel table leg has a load bearing capacity of 660 lbs per leg, so one leg can support substantial weight at a free corner or along an overhanging edge.
The Camar 615-8S-19 Hamburg Series steel table leg has a 2-3/8 inch diameter, concentrating strength into a relatively compact footprint under the counter or work surface.
This Hamburg Series steel table leg is supplied in a flat black finish, giving a dark, low-sheen appearance that coordinates well with black hardware and darker casework.
This single pack counter height steel table leg suits peninsulas, islands, and work surfaces that need one structural support point matching 34-1/4 inch counter height.
The Camar Hamburg Series steel table leg with 2-3/8 inch diameter, 34-1/4 inch counter height, and 1-1/8 inch adjustable foot gives a focused solution for supporting a single counter or work surface point. The 660 lb per leg capacity supports designs with heavy tops and significant overhang, while the flat black finish and compact profile help the support visually blend into the installation. Using the 615-8S-19 part number, align this leg with projects that call for a counter height, adjustable, steel support in flat black from the Hamburg Series.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Set |  CM660-00-60 Mfr# 660-00-60 | Modesty Panel Clips, Hardware Sets Clips Used to Attach Panels to Steel Legs, Black - 12 Each |
