Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Steel table legs give bar height work surfaces a stable, engineered support that suits commercial and shop environments. This Camar Hamburg Series leg is a steel table leg designed for bar height applications at 43 inches, so it matches typical bar-height counters and tall work tables. The leg has a 2-3/8 inch diameter, which spreads the load over a wider footprint, helping the leg carry weight without flexing in normal use. Each leg is rated for a 660 lbs load bearing capacity, so one leg can support heavy tops or equipment in high-use areas. The brushed steel finish provides a neutral, professional appearance that coordinates with common hardware and appliances while resisting visual wear in busy spaces. The built-in adjustable foot offers 1-1/8 inches of vertical adjustment, allowing the installer to fine tune height on uneven floors so the top sits level and solid.
The Hamburg Series 43 inch brushed steel leg is designed as a steel table leg for bar height applications, so it supports tall counters and tables in one standardized length. Each leg is supplied with a separate bracket used to attach the leg to the underside of the table, giving you a defined connection point instead of field-fabricating mounts. The leg's 2-3/8 inch diameter provides a broad seating surface to the bracket interface, which helps transfer loads directly into the top. The 1-1/8 inch adjustable foot is integrated into the leg, so vertical fine tuning occurs at floor contact rather than at the bracket, making on-site leveling straightforward in tight installations.
The 43 inch bar height table leg from the Hamburg Series is suited to bar height work surfaces where a single steel support must carry significant weight. With a 660 lbs load bearing capacity per leg, it can support solid tops, dense countertop materials, or equipment placed at bar height in woodworking shops, commercial spaces, or residential bars. The 2-3/8 inch diameter gives the leg a substantial stance under deeper tops, which is helpful when supporting overhangs or concentrated loads near the edge. The brushed steel finish blends into environments that use stainless or brushed hardware, so the support structure looks consistent with pulls, appliances, and fixtures.
The Hamburg Series design as a premium line of steel table legs means each leg is built around the same load bearing capacity of 660 lbs, allowing repeatable performance across multiple stations using the same model. The integrated 1-1/8 inch adjustment in the foot lets installers match heights between adjacent counters by dialing in small changes at the base, rather than altering the structure of the top. The separate bracket supplied for attaching the leg to the table defines the mounting geometry from leg to leg, which helps multiple legs line up evenly along a bar or island. The availability of lengths at 27-3/4 inches, 34-1/4 inches, and 43 inches within the Hamburg Series also simplifies planning when a project mixes table height, counter height, and bar height surfaces, because each height uses the same construction style and finish family.
This Hamburg Series leg is 43 inches long, so it is intended for bar height work surfaces and tall tables where a bar-height counter is required.
Each steel table leg in the Hamburg Series has a load bearing capacity of 660 lbs per leg, allowing a single leg to support heavy tops or equipment at bar height.
The 43 inch bar height table leg has a 2-3/8 inch diameter, which provides a substantial support column suitable for deeper or heavier work surfaces.
The leg's 1-1/8 inch adjustable foot lets you fine tune the finished height at the floor, helping level the work surface over uneven substrates.
This Camar Hamburg Series leg uses a brushed steel finish, giving a neutral, professional look that coordinates with other brushed metal hardware.
The Hamburg Series offers steel table legs in lengths of 27-3/4 inches, 34-1/4 inches, and 43 inches, covering table height, counter height, and bar height applications.
This brushed steel table leg from the Camar Hamburg Series combines a 43 inch bar height length, 2-3/8 inch diameter, and 660 lbs per-leg capacity to support demanding tops. The built-in 1-1/8 inch adjustable foot and defined bracket connection give installers a consistent way to mount and level bar height work surfaces across multiple stations or projects.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Set |  CM660-00-60 Mfr# 660-00-60 | Modesty Panel Clips, Hardware Sets Clips Used to Attach Panels to Steel Legs, Black - 12 Each |
