Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hamburg table leg chrome sets up a counter-height support using a 34-1/4 inch high steel leg so you can build or retrofit work surfaces and tables to a consistent working height. The 2-3/8 inch diameter steel construction provides a substantial bearing area at the floor and underside, which helps spread load and reduce point pressure on tops and flooring. Each leg has a 660 lbs per leg load bearing capacity, giving you a clear structural rating to work with when planning spans and bracing for counters or tables. The leg is part of Peter Meier's Hamburg Series, a premium line of steel table legs, so multiple heights in the same visual style are available when a project mixes table, counter, and bar elevations. The chrome finish provides a bright, clean look that suits both shop and finished interior applications where exposed steel legs are part of the design.
The 34-1/4 inch Hamburg table leg height works with common counter thicknesses to reach counter-height working levels, which simplifies planning for kitchen, breakroom, or shop counters. All legs have 1-1/8 inch adjustment built-in feet, so you can fine-tune height to compensate for floor variation or align multiple legs under one top. The built-in adjustment at the foot lets you dial in the last bit of level without cutting the steel tube, which keeps the factory finish intact. This leg is classified under Work Surface & Tables | Table Legs, so it is intended as a primary structural support for tops rather than as light trim or decorative elements.
The Camar Hamburg table leg with 34-1/4 inch height is suited to counter-height applications, where a taller working surface is needed compared with standard table height. Because the Hamburg Series also offers 27-3/4 inch table height and 43 inch bar height legs, you can maintain a consistent design language when a project steps between seating heights. The steel construction fits both residential and commercial work surface environments where a metal leg is appropriate beneath laminate, solid surface, or wood tops. The chrome finish helps this leg pair with lighter or contemporary interiors, so exposed legs can align with other chrome elements such as pulls, faucets, or equipment stands. With its 660 lbs per leg capacity, this leg suits counters that support heavier loads such as small appliances, tools, or concentrated storage along the run.
The all legs have 1-1/8 inch adjustment built-in feet detail lets you handle floors that are out of level by more than a minor shim, which is common in remodel situations or older buildings. That adjustment range helps you set a straight, level counter line even when the subfloor is uneven, improving fit with adjacent cabinetry or walls. The 2-3/8 inch diameter provides a predictable bearing point, so when you are laying out leg positions under a deep top you know the clearance needed from edges, corners, and user traffic paths. The defined 34-1/4 inch height simplifies repeatable cuts for aprons or cross-bracing, because the leg dimension is fixed and published. Because the Hamburg Series specifies 27-3/4 inch, 34-1/4 inch, and 43 inch options, you can repeat layouts across projects and simply call out the required height by application: table height, counter height, or bar height. Working to the 660 lbs per leg capacity, you can calculate the number of legs required under wider or heavier tops, translating the rating directly into spacing and support counts.
The 34-1/4 inch high Hamburg leg supports counter-height work surfaces, so it targets applications where a taller working level than standard table height is needed.
The Hamburg table leg has a 660 lbs per leg load bearing capacity, which allows it to support heavy tops or equipment when you plan leg quantity and spacing around that rating.
The leg has 1-1/8 inch adjustment built-in feet, giving vertical range to compensate for floor variations and to align multiple legs under a shared top.
The Hamburg table leg has a 2-3/8 inch diameter, giving a compact but substantial profile that helps balance appearance with under-counter clearance.
This 34-1/4 inch counter height leg is a Camar product from Peter Meier's Hamburg Series, a premium line of steel table legs.
The Hamburg Series is available in Gloss Black, Flat Black, Chrome, Brushed Steel, and White, so projects can coordinate leg finishes across different heights.
The Camar Hamburg table leg in chrome combines a 34-1/4 inch counter-height dimension with 2-3/8 inch diameter steel construction and a 660 lbs per leg capacity, giving you clear structural data for work surface planning. With 1-1/8 inch adjustment built-in feet, this Hamburg table leg chrome option lets you level tops across uneven floors while preserving the factory-cut tube. When a project calls for consistent style across table, counter, and bar heights, the Hamburg Series height range helps standardize your layouts around one proven leg family.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Set |  CM660-00-60 Mfr# 660-00-60 | Modesty Panel Clips, Hardware Sets Clips Used to Attach Panels to Steel Legs, Black - 12 Each |
