Steel Table Legs, 1-1/8" Adjustment, 2-3/8" Diameter, Counter Top Height 34-1/4" Adjustable Foot, Chrome - Set of 4

Steel Table Legs Chrome For Countertops

Steel table legs chrome give you a counter height support solution that ties directly into demanding work surfaces. This Camar Hamburg Series set uses steel construction with a 2-3/8 inch diameter per leg, so each leg provides a solid, stable column under countertops or work tables. The legs are built as part of a Hamburg Series line with a load bearing capacity of 660 lbs per leg, which supports heavy tops in commercial or workshop environments where concentrated loads are common. Each leg is designed to reach counter height at 34-1/4 inches using an adjustable foot, so the finished height aligns with standard counter installations. The built-in 1-1/8 inch adjustment at the feet lets you compensate for floor unevenness, which helps installers dial in level surfaces across runs of cabinets or islands without reworking the substrate.

Key Details That Support Countertop Projects

• The Hamburg Series steel construction with 660 lbs per leg load capacity supports substantial countertop or work surface loads, which matters when building islands, commercial counters, or shop benches that must stay rigid under heavy use.
• The 2-3/8 inch diameter leg design spreads the load over a broad steel column, reducing flex at the corners or mid-span support points, which helps keep solid surface or laminate tops feeling firm when people lean or equipment is placed.
• The 34-1/4 inch counter height design targets standard countertop elevation, letting installers match adjacent cabinet runs more easily and maintain a consistent working plane across connected surfaces.
• The 1-1/8 inch built-in adjustment in the feet allows fine-tuning of final height at each leg, which helps correct for out-of-level floors and reduces shimming work under cabinets or bases during installation.
• The chrome finish is one of five available finishes for this Hamburg Series, giving a reflective, clean look that pairs well with modern counter designs where the leg remains visible under overhangs or open work surfaces.

Counter Height Leg Setup And Adjustment

This Camar Hamburg Series counter height leg set is configured around a 34-1/4 inch adjustable foot, so installers can target a standard counter working height while using the 1-1/8 inch built-in adjustment to account for floor variation. Each steel table leg uses a 2-3/8 inch diameter profile, which provides a predictable footprint when laying out support locations relative to cabinet edges or wall lines. The chrome finish on the legs presents a consistent, smooth outer surface, so layout marks and scratches are easier to spot during fitting and touch-up. Because the load bearing capacity is rated at 660 lbs per leg, installers can plan leg spacing and support points knowing each leg can carry significant weight where counters extend beyond cabinet bases or support freestanding work tables.

Using Camar Hamburg Legs In Real Projects

Where These Steel Table Legs Chrome Fit Best

The Hamburg Series steel table legs chrome fit projects that call for a counter height support at 34-1/4 inches, such as kitchen peninsulas, office counters, or shop work surfaces, where open space beneath the top is expected. The 2-3/8 inch diameter size allows these legs to sit at corners, mid-runs, or under overhangs without appearing undersized relative to substantial countertop materials. With each leg carrying a 660 lb load rating, this configuration is suited to heavy tops or concentrated equipment zones, since each support can handle localized loads without compromising the overall installation. The chrome finish suits installations where the leg remains visible, so the support element can align with metal appliances, trim, or hardware for a cohesive appearance around the work surface.

How Camar 615-87-C1 Supports Repeatable Installs

The Camar 615-87-C1 Hamburg Series set uses defined dimensions - a 2-3/8 inch diameter steel tube and a counter height of 34-1/4 inches with 1-1/8 inch foot adjustment - so installers can repeat layouts from job to job with predictable results. That consistent size allows fabricators to pre-plan hole locations, edge setbacks, and clearance to cabinet doors or panels, reducing onsite fitting. The 660 lb per leg load rating gives designers a clear basis for choosing leg count under long runs or large islands, simplifying engineering decisions around overhang and support spacing. Because five finishes are available in the Hamburg Series, including this chrome option, shops can maintain a single structural approach while matching different design schemes, which streamlines specification and keeps fabrication workflows aligned across multiple projects.

Common Questions About Hamburg Counter Legs

Select Steel Table Legs Chrome For Counters

Choose these steel table legs chrome when a 34-1/4 inch counter height installation needs defined load capacity and adjustment. The Hamburg Series steel construction, 2-3/8 inch diameter, and 660 lb per leg rating give designers and installers a clear structural basis for supporting heavy countertops or work tables. The 1-1/8 inch adjustable foot lets crews fine-tune final height at each point, aligning tops across uneven floors. With the Camar 615-87-C1 set, shops can standardize around a known counter height leg system that supports repeatable layouts and consistent visual results on chrome-accented projects.