2-3/8" Diameter x 27-3/4" High Hamburg Single Table Leg, Brushed Steel

Hamburg Steel Table Leg For Work Surfaces

Hamburg steel table leg defines a single, structural support built for work surfaces where a 27-3/4 inch high, 2-3/8 inch diameter leg is needed. This Camar leg from Peter Meier's Hamburg Series is part of a premium line of steel table legs, so it suits jobs that call for a robust, clean-looking support. Each leg provides a load bearing capacity of 660 lbs per leg, which supports heavy tops, tools, or dense materials in a single-leg position. The brushed steel finish delivers a neutral, professional look that pairs well with other shop and office hardware while resisting visual wear in high-use areas. As a 27-3/4 inch table-height leg, it targets standard desk and work table builds. Built-in adjustment in the foot lets the installer fine-tune height on uneven floors, keeping tops level without shimming the structure.

Key Hamburg Table Leg Details For Jobs

• The premium steel construction in Peter Meier's Hamburg Series provides a rigid leg that supports demanding work surface applications, which matters when building tables expected to handle regular loading.
• The 2-3/8 inch diameter tube delivers a substantial profile, helping resist flex under load and giving tables a sturdy look that matches its 660 lbs per leg rating.
• The 27-3/4 inch table-height length matches standard work table and desk heights, which simplifies planning when coordinating with cabinets or existing surfaces.
• The brushed steel finish presents a clean, modern appearance that blends with chrome, stainless, and neutral hardware, helping maintain a consistent look across a project.
• The 1-1/8 inch adjustment built into the feet allows fine tuning of leg height to compensate for floor irregularities, improving top alignment across multiple legs.
• The separate bracket used to attach the leg to the table creates a defined interface between top and leg, supporting secure mounting and easier layout during fabrication.

Hamburg Leg Mounting And Height Adjustment

This 2-3/8 inch diameter Hamburg leg uses a separate bracket to attach the leg to the underside of the work surface, giving a clear mounting point for layout. The bracket connection establishes a fixed position for the tube, which helps repeat hole patterns when building multiple tables. The leg stands 27-3/4 inch high at table height, aligning with common work surface ergonomics. Built-in 1-1/8 inch adjustment in the feet gives vertical travel for leveling; this allows the installer to dial in final height without cutting the tube. That integrated adjustability helps compensate for floor variations between legs, supporting consistent contact and reducing rocking across the table footprint.

Using This Camar Hamburg Leg In Projects

Where This Brushed Steel Table Leg Fits Best

This Camar Hamburg Series table leg suits work surfaces and tables built at standard table height, thanks to its 27-3/4 inch length. The 2-3/8 inch diameter profile pairs well with both light and substantial tops, creating a balanced look under wood, laminate, or composite work surfaces. With a load bearing capacity of 660 lbs per leg, the leg supports applications where heavy items, dense tops, or equipment rest on the surface. The brushed steel finish works well in office, shop, and commercial interiors that use neutral metal finishes. As part of Peter Meier's premium Hamburg line, this leg matches other Hamburg height options in 34-1/4 inch counter height and 43 inch bar height, which helps maintain a consistent visual language across mixed-height installations. The single-leg configuration is practical for peninsula desks, support points under large tops, or freestanding table designs.

Details That Support Repeatable Mounting Results

The defined 2-3/8 inch diameter and 27-3/4 inch height give fabricators predictable dimensions when laying out apron clearances and edge reveals. The bracket-based mounting system sets a stable connection between table top and steel tube, which supports accurate placement when multiples are used in a run. The 1-1/8 inch built-in adjustment in the feet lets the installer fine tune each leg independently, important when floors vary across the table span. That adjustment range also helps align adjacent work surfaces to a shared plane, using the leg as a leveling point instead of altering the top. The 660 lbs per leg rating provides a clear capacity reference for design decisions, guiding how many supports are allocated under a given work surface. With the brushed steel finish, the leg maintains a consistent appearance around the entire tube, which simplifies orientation during installation because any visible side matches the rest.

Common Questions About This Hamburg Table Leg

Selecting This Hamburg Leg For Your Next Table

The 2-3/8 inch diameter x 27-3/4 inch high Hamburg steel table leg in brushed steel gives you a defined, table-height support with a 660 lbs per leg capacity, a separate mounting bracket, and 1-1/8 inch foot adjustment. Those details suit professional installers and serious DIY builders who want predictable dimensions, reliable load capacity, and on-site leveling flexibility. For projects needing a premium steel leg that aligns with the Hamburg Series line, this Camar model 615-7S-ST offers a straightforward way to support table-height work surfaces with a consistent, brushed steel appearance.